
Product Details

Cracked your iPhone 16e or iPhone 17e screen? Or is the display showing lines, black patches or flicker, or is it not responding to touch? This REPART in-cell LCD screen replacement swaps the complete display and touch digitiser on the iPhone 16e and 17e (A3212, A3408, A3409, A3410, A3575, A3634 and A3635), with the metal LCD shield plate already fitted to the back.
Also available for the iPhone 16e and 17e: Soft OLED (OLED picture quality)
It is built for the iPhone 16e and iPhone 17e, which share the same 6.1-inch screen, so one part fits both. Need an iPhone 16e or 17e LCD replacement to keep the cost down? The 16e and 17e came with an OLED screen, so this LCD is a budget friendly alternative. It has a slightly thicker border and lower contrast than OLED.
- IN-CELL TECHNOLOGY - The LCD and touchscreen are in the same layer, so touch is quick and reliable, with even colour and brightness right to the edges. No delayed touch, shadows or dark patches like cheap out-of-cell (OOC) screens.
- PREMIUM LCD - A premium TFT LCD with brighter colours, whiter whites and darker blacks than other aftermarket LCD screens. One integrated driver chip runs display and touch together, for better power efficiency.
- PRECISE FIT - Chip-on-Flex (COF) bonding keeps the border slim for an LCD, and the dimensions and cutouts match the Apple screen, so installation is a breeze.
- QUALITY TESTED - Built from quality materials and components, and rigorously tested so REPART screens outperform standard LCD screens.
- TRUE TONE CAPABLE - With iOS 18 or later, True Tone works with this screen without a transfer machine.
- COST EFFECTIVE - A much cheaper alternative to Apple's OLED screens, saving you money.
Part Includes:
- iPhone 16e / iPhone 17e REPART In-Cell LCD Screen and Touch Digitiser Assembly
- Metal LCD shield plate (pre-installed)
- iPhone 16e / iPhone 17e Screen Gasket Adhesive
- 12 Month Warranty
Please Note
Does NOT fit iPhone 14, 16 or 13. The iPhone 14 looks the same from the front. Check in Settings, General, About for your model.
Please Note
Fits both the iPhone 16e and iPhone 17e, which use the same screen. Face ID stays in the phone and keeps working. True Tone (iOS 18 or later) works once you move the front sensors across.
Please Note
Third party LCD screen, not an official Apple product. iOS will list it as an Unknown Part. This is normal.
Specifications
- Screen Type: TFT-LCD
- Screen Brand: REPART
- Touch System Type: In-Cell
- Driver IC: TDDI integrated chip
- Backlight Type: ESR
- Display Size: 6.1"
- Refresh Rate: 60Hz
- Polariser Viewing Angle: 360 degrees
- True Tone Capable: Yes (iOS 18 or later)
- IC Transferable: Yes
- Colours: Black
- Front Sensor Flex: Not included - transfer from your old screen
- Earpiece Speaker: Not part of the screen - stays in your phone
- Pairing: Not paired. Shows as an Unknown Part, but the screen works normally.
- Warranty: 12 Months
Compatible Model Numbers
iPhone 17eModel Number (A Number)
- A3575
- A3634
- A3635
iPhone 17e Model Numbers
Model Identifier
- iPhone18,5
EMC Number
- EMC 9145
- EMC 9147
- EMC 9148
Device Number (M Number)
- MHRP4
- MHRT4
- MHRN4
- MHRR4
- MHRQ4
- MHRU4
- MHRW4
- MHU04
- MHRV4
- MHRY4
- MHRX4
- MHU34
- MHU54
- MHU94
- MHU44
- MHU74
- MHU64
- MHUA4
iPhone 16eModel Number (A Number)
- A3212
- A3408
- A3409
- A3410
iPhone 16e Model Numbers
Model Identifier
- iPhone17,5
EMC Number
- EMC 8725
- EMC 8726
- EMC 8727
- EMC 8728
Device Number (M Number)
- MD0E4
- MD0G4
- MD0Q4
- MD0D4
- MD0F4
- MD0J4
- MD1G4
- MD1J4
- MD1P4
- MD1F4
- MD1H4
- MD1L4
- MD1R4
- MD1W4
- MD274
- MD1Q4
- MD1T4
- MD1X4
- MD2C4
- MD2E4
- MD2G4
- MD2A4
- MD2D4
- MD2F4
Installation Help
Check out the video above or the step by step guide below for assistance with this repair
iFixit iPhone 16e Screen Replacement Guide
iFixit iPhone 17e Screen Replacement Guide
Here are some tools you may need to help you complete the repair.
Please note: A discounted simple toolset with the tools you need is available in a pop-up when you add this product to cart
- P2 Metal Pentalobe 0.8mm Screwdriver Tool
- Y000 Metal Triwing Tri-Point 0.6mm Screwdriver Tool
- Large Blue Suction Cup Opening Tool
- Mechanic AK-15 King ESD Anti-Static Stainless Steel Red Curved Tweezers
- iGadget Plastic Triangle Opening Picks (set of 5)
- 5x iGadget Plastic Flexible Opening Cards
- Nylon Antistatic Spudger Pry Tool
- Or get the P2 and Y000 screwdrivers, suction cup, tweezers, opening pick, opening card and spudger together in our 8 Piece iPhone Repair Toolkit
- iSclack Evo (Gen 3) Suction Cup Opening Tool for phones and tablets by Dottorpod
- uFix iOpener Microwaveable Heated Bag Opening Tool
- iHold Evo Screen Holding Opening Tool for iPads and iPhones with USB-C Adapter by Dottorpod
- 1mm Tesa Tape 61395 Roll Double Sided Adhesive Tape (50m)
- iGadget Plastic Alcohol 200mL Bottle with Pump Top
- iGadget Universal Magnetic Work Project Mat with Marker (30cm x 25cm)
Here are some helpful tips to assist you in completing a safe repair on your device. If you are unsure of something or have any questions, please feel free to contact us either by phone (0508 IGADGET) or by email
- Drain the battery below 25% before you start on this repair
- Always power down your device prior to working on it
- The battery can't be disconnected for this repair. Keep the phone powered off, keep metal tools away from the battery and board, and never bend, crush or puncture the battery.
- Track your screws, they are different lengths, and each one must go back in its own hole. Use a screw mat to keep them in place
- Warm the edges, lift the screen with a suction cup and keep picks no more than 3mm deep. The screen opens like a book from the right side, hinged on the left, where the display cables run
- Unplug the display cable first, then the front sensor cable, before attempting any component removal
- The front sensor assembly (ambient light sensor, proximity sensor and microphone) is not fitted to the new screen, so move it across from your old one. The earpiece and Face ID camera stay put. Re-stick the cable with Tesa tape
- Test touch, display, earpiece, proximity (screen turns off during a call), auto-brightness and Face ID before sealing the phone, and don't peel off the protective film or any stickers until it's all working
- Opening your iPhone breaks its factory water-resistance seal. Clean off the old adhesive with isopropyl alcohol and fit the new screen gasket adhesive included in the box when you reassemble it.
- This screen supports IC transfer - a micro-soldering specialist can move the display IC from your old screen onto this one
- Once the repair is finished, turn True Tone on in Settings > Display & Brightness
What’s In The Box
- 1x iPhone 16e / iPhone 17e REPART In-Cell LCD Screen Replacement (metal LCD shield plate pre-installed)
- 1x iPhone 16e / iPhone 17e Screen Gasket Adhesive
