
Often bought with this part

Product Details
Cracked screen on your iPad Mini 5, touch not responding or no picture? On the iPad Mini 5 the glass, touch digitiser and LCD are bonded together as one part, so a cracked screen is fixed by replacing the whole assembly. This is a brand new aftermarket screen, not an official Apple part.
Also for the iPad Mini 5: Front Glass (for refurbishers with LCD separating gear)
- COMPLETE SCREEN ASSEMBLY - Glass, touch digitiser and LCD bonded together and ready to fit, so there's no separating layers.
- SHARP 7.9-INCH PICTURE - 2048 x 1536 resolution at 326 ppi, the same as the display your iPad came with.
- TESA TAPE PRE-FITTED - Tesa adhesive comes fitted round the edge, so there's no cutting and laying adhesive strips.
- SENT FROM NZ STOCK - Shipped from our New Zealand stock, so there's no waiting weeks for a part to arrive from overseas.
Part Includes:
- 7.9-inch LCD and touch digitiser assembly
- Pre-fitted Tesa adhesive
- 12 Month Warranty
Please Note
Does NOT fit the iPad Mini 4, which looks the same but takes a different screen. Check the A number on the back of your iPad.
Please Note
Home button not included. Move your own across to keep Touch ID, as a replacement home button can't use it.
Specifications
- Display Size: 7.9-inch (diagonal)
- Resolution: 2048 x 1536 pixels (326 ppi)
- Display Type: LCD
- Refresh Rate: 60Hz
- Type: LCD and touch digitiser assembly, glass laminated
- Adhesive: Tesa tape pre-fitted
- Home Button: Not included, your original moves across
- Sleep/Wake Sensor: Fitted
- Colour: Black or White
- Condition: Brand new aftermarket
- Pairing: Not needed. This iPad doesn't check its screen, so no Unknown Part message.
- Warranty: 12 Months
Compatible Model Numbers
iPad Mini 5 WiFiModel Number (A Number)
- A2133
iPad Mini 5 WiFi Model NumbersHow do I find my Model number?
Model Identifier
- iPad11,1
EMC Number
- EMC 3313
Device Number (M Number)
- MUQW2
- MUQX2
- MUQY2
- MUU32
- MUU52
- MUU62
iPad Mini 5 WiFi + CellularModel Number (A Number)
- A2124
- A2125
- A2126
iPad Mini 5 WiFi + Cellular Model NumbersHow do I find my Model number?
Model Identifier
- iPad11,2
EMC Number
- EMC 3314
Device Number (M Number)
- MUXF2
- MUXG2
- MUXH2
- MUXM2
- MUXN2
- MUXP2
Installation Help
Check out the video above or the step by step guide below for assistance with this repair
iFixit iPad Mini 5 Screen Replacement Guide
Here are some tools you may need to help you complete the repair.
Please note: A discounted simple toolset with the tools you need is available in a pop-up when you add this product to cart
- #00 Metal Phillips 2.0mm Screwdriver Tool (PH00)
- uFix iOpener Microwaveable Heated Bag Opening Tool
- CPB 320 Repair Heat Pad for mobile phones and tablets
- Large Blue Suction Cup Opening Tool
- iGadget Plastic Triangle Opening Picks (set of 5)
- Nylon Antistatic Spudger Pry Tool
- Mechanic AK-15 King ESD Anti-Static Stainless Steel Red Curved Tweezers
- iGadget Plastic Alcohol 200mL Bottle with Pump Top
- B7000 Multipurpose Liquid Repair Glue - 15ml
- iGadget Universal Magnetic Work Project Mat with Marker (30cm x 25cm)
Here are some helpful tips to assist you in completing a safe repair on your device. If you are unsure of something or have any questions, please feel free to contact us either by phone (0508 IGADGET) or by email
- Drain the battery below 25% before you start on this repair
- Power the iPad off before you start, and tape over cracked glass so it lifts in one piece.
- Warm the edges with the iOpener or heat pad in short passes, as too much heat can damage the battery.
- Keep opening picks shallow near the front camera at the top, and stop about 1cm short of the home button at the bottom.
- Unplug the battery before the display connectors. Keep metal tools away from it, and never bend, crush or puncture it.
- Always track your screws on a magnetic mat, as they are different lengths.
- Refit press connectors by pressing one side then the other until they click, never the middle.
- Move your own home button across to keep Touch ID. Its cable is very thin, so slide it out with tweezers slowly, and glue the bracket back with B7000.
- The sleep/wake (Smart Cover) sensor comes fitted on the new screen, so there's nothing to move across for it.
- Test touch, the picture, the home button and Touch ID before you seal it, and leave the protective film on until the new screen works.
- Clean the old adhesive off the frame with isopropyl alcohol before you stick the screen down, and hold it while the adhesive sets.
What’s In The Box
- 1x iPad Mini 5 replacement LCD and digitiser assembly, Tesa adhesive pre-fitted

In Stock