iPad Air 2 Glass & Digitizer Screen Replacement
iPad Air 2 Glass & Digitizer Screen Replacement
In Stock
iPad Air 2 Glass & Digitizer Screen Replacement
iPad Air 2 Glass & Digitizer Screen Replacement
In Stock
- Pre-installed Quality TESA Tape 61395 Adhesive for a secure seal
- OEM Glass and Digitiser which reacts as it should to your finger
- Suitable replacement for touch issues or a broken screen if LCD is still working
- Fits iPad Air 2 models; A1566 & A1567
Frequently Bought Together
Frequently Bought Together
Product Details
There are so many iPad screens on the market that use cheap quaility replacement materials. Often corners are cut with circuit routing and gluing rather than fusing flex cables which eventually leads to touchscreen issues. Even a lot of OEM screens use a cheaper quality glass that results in a thicker screen making it hard to fit the home button. iGadget replacements screens use original quality glass, flex cables and construction methods so that you get as close to the Original as possible at a reasonable price
This iPad Air 2 screen digitizer replacement is the all-in-one solution and includes all of the small parts you need pre-installed to save you time and ensure a higher quality repair.
Replace a smashed, scratched or cracked front glass digitiser on your iPad Air 2 (A1566 & A1567) to fix touch functionality or home button issues.
Features:
- Genuine internal copper framing
- Original flex cabling and circuit routing
- High Grade Aluminium white glass - same glass used in Gorilla glass
- Highly responsive capacitive digitiser touch system
- Similar thickness to original Apple screen - up to 20% thinner than most OEM replacements
- Pre-installed pressure activated 61395 TESA Tape - The best repair tape on the market
- Pre-installed electromagnetism anti-static foam border
- Pre-installed camera bracket
- 12 Month Warranty
Warning
The Glass and Digitiser is glued to the LCD, you will need special tools to remove the LCD and re-install on your new glass. Please make sure you know the process prior to purchasing this productPlease Note
Soldering is required to swap your Sleep/Wake sensor from the old screen to new screenSpecifications
- Type: Replacement Glass and Digitser
- Adhesive: TESA Tape 61395 pre-installed
- Home Button: Not Included
- Glass Type: Aluminium white glass
- Warranty: 12 Months
Compatible Model Numbers
iPad Air 2 WifiModel Number (A Number)
- A1566
iPad Air 2 Wifi Model Numbers How do I find my Model number?
Model Identifier
- iPad5,3
EMC Number
- EMC 2822
Device Number (M Number)
- MGKL2
- MGKM2
- MGL12
- MGLW2
- MGTX2
- MGTY2
- MH0W2
- MH182
- MH1J2
- MNV22
- MNV62
- MNV72
iPad Air 2 Wifi + CellularModel Number (A Number)
- A1567
iPad Air 2 Wifi+Cellular Model Numbers How do I find my Model number?
Model Identifier
- iPad5,4
EMC Number
- EMC 2823
Device Number (M Number)
- MH2M2
- MH2N2
- MH2P2
- MH2U2
- MH2V2
- MH2W2
- MH312
- MH322
- MH332
- MNW12
- MNW22
- MNW32
Installation Help
Watch the video above for assistance in completing this repair
Here is some tools you may need to help you complete the repair.
Please note: This screen comes with a simple toolkit, please check the "what's in the box" section for details
- Phillips #000 Screwdriver
- iSesamo opening tool
- iGadget 5 piece opening picks
- Fine Tipped Curved Tweezers
- Black Spudger
- uFix iOpener Heat bag
- iFlex metal opening tool
- iPlastix plastic opening tool
- Screw Mat
- B7000 repair glue
- Soldering Iron
- Vacuum glass seperator
Here are some helpful tips to assist you in completing a safe repair on your device. If you are unsure of something or have any quesions, please feel free to contact us either by phone (0508 IGADGET) or by email
- Always track your screws to avoid putting back in the wrong place and damaging your device. You can draw a picture of your phone and tape the screws to the right places or use a screw mat
- Always power down your device prior to working on it
- We recommend isolating the battery prior to working inside the device, if this is not possible, avoid using metal tools around contacts and connectors.
- If your iPad does not turn on or show an image after your repair, you may need to perform a force restart. To do this, press and hold the power button and home button until the apple logo appears onscreen.
- Soldering is required to swap your Sleep/Wake sensor from the old screen to new screen
- The Glass and Digitiser is glued to the LCD, you will need special tools to remove the LCD and re-install on your new glass
What’s In The Box
- 1x iPad Air 2 screen replacement
- 1x iGadget metal opening tool
- 2x iGadget plastic opening cards
- 1x Phillips screwdriver
- 1x Small plastic spudger
- 1x Opening pick
- 1x Suction cup