Samsung Tab S7 FE Screen Replacement | OEM LCD and Digitiser (SM-T730, T733, T735, T736B)
Samsung Tab S7 FE Screen Replacement | OEM LCD and Digitiser (SM-T730, T733, T735, T736B)
Regular price
NZ$119.99
Regular price
Sale price
NZ$119.99
Unit price
per
inc GST
Samsung Tab S7 FE Screen Replacement | OEM LCD and Digitiser (SM-T730, T733, T735, T736B)
Samsung Tab S7 FE Screen Replacement | OEM LCD and Digitiser (SM-T730, T733, T735, T736B)
Regular price
NZ$119.99
Regular price
Sale price
NZ$119.99
Unit price
per
inc GST
Email me when back in stock
DIY DIFFICULTY
ModerateAbout 1 to 2 hours
The screen is glued to the front of the frame and comes off with heat and picks, then its flex unplugs from the board.
- Samsung Galaxy Tab S7 FE screen replacement: premium OEM TFT LCD and digitiser assembly
- Fixes a cracked screen, black display, lines or touch not responding
- Compatible with Samsung Galaxy Tab S7 FE models; SM-T730, SM-T733, SM-T735, SM-T736B, SM-T738U
Frequently Bought Together
Frequently Bought Together
Product Details
Cracked your Samsung Tab S7 FE screen, or is the display black, showing lines, or no longer responding to touch? This is a premium OEM LCD and digitiser assembly for the Galaxy Tab S7 FE 12.4" (SM-T730, SM-T736B).
Got the 11" Tab S7 SM-T870 or T875? This is the screen for it.
- OEM LCD, MATCHES THE ORIGINAL - The TFT LCD panel and its IC come from the same manufacturer Samsung uses, in the original 12.4" size and 1600 x 2560 resolution, so it looks and works like the screen you had.
- GLASS, LCD AND TOUCH TOGETHER - The glass, LCD and digitiser come bonded as one assembly, so cracked glass, a dead display and touch faults are all fixed with the one part.
- S PEN WORKS - The S Pen digitiser layer is part of the assembly, so your S Pen writes, draws and hovers on the new screen just like it did on the original.
- TOUGH, SMUDGE RESISTANT GLASS - 9H rated glass with an oleophobic coating, so it stands up to everyday scratches and wipes clean of fingerprints.
- PRECISE FIT - The cutouts and edges line up with the original, so the screen sits flush in your tablet's frame.
- SENT FROM NZ STOCK - Shipped from our New Zealand stock, so there's no waiting weeks for a part to arrive from overseas.
Part Includes:
- Samsung Galaxy Tab S7 FE OEM LCD and digitiser assembly
- 12 Month Warranty
Please Note
Does NOT fit the Tab S7+ (OLED) or the 11 inch Tab S7, and is not confirmed to fit the Tab S9 FE+. Check in Settings, About tablet for your model.
Please Note
No frame is included: the new screen fits onto your tablet's own frame with fresh adhesive.
Please Note
Assembled by a third party manufacturer, so it is not an official Samsung part.
Specifications
- Screen Type: TFT LCD
- Display Size: 12.4"
- Resolution: 1600 x 2560 pixels
- S Pen: Supported
- Colours: Black
- Glass Rating: 9H
- Middle Frame: Not included
- Warranty: 12 Months
Compatible Model Numbers
Samsung Galaxy Tab S7 FEModel Number (SM Number)
- SM-T730
- SM-T733
- SM-T735
- SM-T736B
- SM-T738U
Installation Help
Check out the video above for assistance with this repair
Here are some tools you may need to help you complete the repair.
- #00 Metal Phillips 2.0mm Screwdriver Tool (PH00)
- #000 1.5mm Metal Phillips Screwdriver Tool (PH000)
- iSclack Evo (Gen 3) Suction Cup Opening Tool by Dottorpod
- Large Blue Suction Cup Opening Tool
- iGadget 5 piece opening picks
- 5x iGadget Plastic Flexible Opening Cards
- Nylon Antistatic Spudger Pry Tool
- uFix iOpener Microwaveable Heated Bag Opening Tool
- Box of Isopropyl Adhesive Cleaning Alcohol Pad Wipes x100
- 2mm Tesa Tape 61395 Roll Double Sided Adhesive Tape (100m)
Here are some helpful tips to assist you in completing a safe repair on your device. If you are unsure of something or have any questions, please feel free to contact us either by phone (0508 IGADGET) or by email
- Drain the battery below 25% before you start on this repair
- Power the tablet off and take out the SIM / microSD card tray before you open it.
- The screen is glued to the front of the frame. Warm the edges gently with the iOpener in short bursts, as too much heat can damage the battery, then lift a corner with the suction cup or iSclack and work picks and cards around the edge, no more than 2 to 3mm in, or you can cut the flex cables under the edges.
- Lift the screen like opening a book, away from the side its flex cable is on, and never pull on the flex while it is still connected.
- Always track your screws (Phillips #00, with a #000 on hand for any smaller screws) so they go back in the right place. Draw a picture of your tablet and tape the screws to it, or use a screw mat
- Always unplug the battery before you remove any other parts. Keep metal tools away from the battery, and never bend, crush or puncture it.
- Unplug the display flex from the board with the spudger. When you connect the new one, press the connector down evenly at both ends, never in the middle, so the pins don't bend.
- Test the display, touch and S Pen before you seal the screen in, and leave the protective film and stickers on until the new screen is working properly.
- Clean the old adhesive off the frame with isopropyl alcohol, fit a strip of 2mm Tesa tape all the way round the frame (no adhesive comes in the box), then press the screen down evenly so it sits flat.
What’s In The Box
- 1x Samsung Galaxy Tab S7 FE OEM LCD and Digitiser Screen Replacement
Related Products
