Sold Out
iPad 2 LCD Replacement | 9.7" Display Screen (2011)
iPad 2 LCD Replacement | 9.7" Display Screen (2011)
Regular price
NZ$69.99
Regular price
Sale price
NZ$69.99
Unit price
per
inc GST
iPad 2 LCD Replacement | 9.7" Display Screen (2011)
iPad 2 LCD Replacement | 9.7" Display Screen (2011)
Regular price
NZ$69.99
Regular price
Sale price
NZ$69.99
Unit price
per
inc GST
Email me when back in stock
DIY DIFFICULTY
Very difficultAbout 1 to 2 hours
The glued glass comes off with heat and has to stay in one piece. The LCD is held by four screws and one connector.
A technician with microsoldering equipment is recommended for this part.
- Replacement 9.7-inch LCD display panel for the iPad 2 (2011), 1024 x 768
- Fixes lines, dead pixels, colour bleed, a flickering, black or blank picture when touch still works
- Compatible with iPad 2 (A1395, A1396, A1397)
Frequently Bought Together
Frequently Bought Together
Product Details
Lines, dead pixels, colour bleed or no picture on your iPad 2? On the iPad 2 the LCD sits under a separate glass and touch digitiser, so if touch still works you only need to replace the LCD.
Also for the iPad 2: Glass and Digitiser with Home Button (when the glass is cracked)
- LCD ONLY - Just the display panel, so if your glass is fine you don't pay for a new screen front.
- SAME RESOLUTION AS THE ORIGINAL - 1024 x 768 at 132 ppi, matching the display your iPad 2 came with.
- SENT FROM NZ STOCK - Shipped from our New Zealand stock, so there's no waiting weeks for a part to arrive from overseas.
Part Includes:
- 9.7-inch LCD panel
- 12 Month Warranty
Please Note
Does NOT fit the iPad 3 or iPad 4, which have a sharper Retina display and take a different LCD, or the iPad Air. Check the A number on the back of your iPad.
Please Note
This part will either be brand new or a used genuine Apple LCD in full working order.
Specifications
- Type: LCD display panel only (no glass or touch)
- Display Size: 9.7-inch (diagonal)
- Resolution: 1024 x 768 pixels (132 ppi)
- Refresh Rate: 60Hz
- Warranty: 12 Months
How do I find my Model number?
iPad 2 Wifi
iPad 2 Wifi + Cellular
Compatible Model Numbers
iPad 2 WifiModel Number (A Number)
- A1395
iPad 2 Wifi Model NumbersHow do I find my Model number?
Model Identifier
- iPad2,1
- iPad2,4
EMC Number
- EMC 2415
- EMC 2560
Device Number (M Number)
- MC769
- MC770
- MC954
- MC979
- MC980
- MC981
- MC989
- MC916
More info Less info
iPad 2 Wifi + CellularModel Number (A Number)
- A1396
- A1397
iPad 2 Wifi + Cell Model NumbersHow do I find my Model number?
Model Identifier
- iPad2,2
- iPad2,3
EMC Number
- EMC 2416
- EMC 2424
Device Number (M Number)
- MC755
- MC763
- MC764
- MC773
- MC774
- MC775
- MC957
- MC982
- MC983
- MC984
- MC985
- MC986
- MC987
- MC992
More info Less info
Installation Help
Check out the video above or the step by step guide below for assistance with this repair
iFixit iPad 2 LCD Replacement Guide
Here are some tools you may need to help you complete the repair.
- #00 Metal Phillips 2.0mm Screwdriver Tool (PH00)
- uFix iOpener Microwaveable Heated Bag Opening Tool
- CPB 320 Repair Heat Pad for mobile phones and tablets
- Large Blue Suction Cup Opening Tool
- iGadget Plastic Triangle Opening Picks (set of 5)
- iPlastix Flexible Opening Tool by Dottorpod
- Nylon Antistatic Spudger Pry Tool
- iGadget Plastic Alcohol 200mL Bottle with Pump Top
- Tesa 61395 Double Sided Adhesive Tape 2mm
- iGadget Universal Magnetic Work Project Mat with Marker (30cm x 25cm)
Here are some helpful tips to assist you in completing a safe repair on your device. If you are unsure of something or have any questions, please feel free to contact us either by phone (0508 IGADGET) or by email
- The battery isn't disconnected for this repair, so power the iPad off and drain it below 25% first. Keep metal tools away from the board and battery, and never bend, crush or puncture the battery
- The glass is glued down over a separate LCD. Warm the edges with the iOpener or heat pad in short passes (too much heat can damage the battery), lift it with the suction cup and work opening picks round. Keep the pick shallow along the bottom right edge, where the Wi-Fi antenna sits for about 75mm in from the corner, and use the iPlastix there. You're refitting this glass, so go slowly, as forcing it can crack it
- Track your screws on a magnetic mat. Remove the four 2mm #00 screws holding the LCD, lift it from the edge nearest the volume buttons and lay it over like a page, then flip up the flap on the LCD cable connector and slide the cable out
- Keep fingerprints and dust off the new LCD, and fit its cable fully into the connector before you close the flap
- Test the picture and touch before you seal it, and leave the protective film on until the new LCD works. If it doesn't turn on or show a picture, force restart it by holding the top button and Home button until the Apple logo appears
- Clean the old adhesive off the frame and glass with isopropyl alcohol, lay new 2mm Tesa tape round the frame, then press the glass down evenly all round
What’s In The Box
- 1x iPad 2 replacement LCD
Related Products
