Watch the video above for assistance in completing this repair

Here is some tools you may need to help you complete the repair.

• Phillips #000 Screwdriver
• P2 Pentalobe Screwdriver
• Y000 Triwing tri-point Screwdriver
• iSclack opening tool
• Suction Cup
• Fine Tipped Curved Tweezers
• iGadget 5 piece opening picks
• Flying Eagle Razor Blade
• Black Spudger
• uFix iOpener Heat bag
• iHold Evo Screen Holder
• Heat Gun
• B7000 Multipurpose Liquid Glue

Here are some helpful tips to assist you in completing a safe repair on your device. If you are unsure of something or have any quesions, please feel free to contact us either by phone (0508 IGADGET) or by email

• Always track your screws to avoid putting back in the wrong place and damaging your device. You can draw a picture of your phone and tape the screws to the right places or use a screw mat
• Always power down your device prior to working on it
• Make sure you always unplug the battery before attemping any component removal
• Because a heat gun is being used, it is recommended you remove the battery and rear camera first to avoid heat directly on those parts
• The rear glass is heavily glued down, a lot of patience is required to remove the glass
• You will also need to remove the rear camera lens with this part as it comes with one preinstalled. This may require the use of a cutting tool such as a dremel