Motorola Moto G06 / G06 Power Screen Replacement | OEM LCD (XT2535)

Motorola Moto G06 / G06 Power Screen Replacement | OEM LCD (XT2535)

MOTO-G06-13
Regular price NZ$28.99
Regular price Sale price NZ$28.99
Sale Sold out
Email me when back in stock
inc GST
SKU MOTO-G06-13
Sold out
Skip to product information

Motorola Moto G06 / G06 Power Screen Replacement | OEM LCD (XT2535)

Motorola Moto G06 / G06 Power Screen Replacement | OEM LCD (XT2535)

MOTO-G06-13
Regular price NZ$28.99
Regular price Sale price NZ$28.99
Sale Sold out
inc GST
Email me when back in stock
DIY DIFFICULTY DifficultAbout 1 to 2 hours

Back cover comes off first. No frame, so the glued screen is heated and lifted off your old frame.

Watch the install video
  • Motorola Moto G06 / G06 Power screen replacement: premium OEM LCD and touch digitiser
  • Fixes a cracked screen, black display, lines or touch not responding
  • Compatible with Motorola Moto G06 and G06 Power models: XT2535-1, XT2535-2, XT2535-3, XT2535-14, XT2535-9 & XT2535-13
Does NOT fit the Moto G05, G15 or E15. Check in Settings, About phone, Model (or Device details, Model) for your XT number.
Regular price NZ$28.99
Regular price Sale price NZ$28.99

Dispatches next business day straight from our NZ warehouse

View full details

Product Details

iGadget Premium OEM LCD screen banner with the blue PRO badge

Cracked your Moto G06 screen, or is the display black, showing lines, or no longer responding to touch? This is a premium OEM LCD and touch digitiser for the Motorola Moto G06 (XT2535) and Moto G06 Power, which share the same 6.88" screen.

Got the Moto G05 or E15? This is the screen for it. Got the Moto G04, G04s, G24, G24 Power or E14? This is the screen for it.

 

  • LIKE-FOR-LIKE LCD - The G06 and G06 Power came with an LCD, and this OEM LCD has the same 6.88" size and 720 x 1640 resolution.
  • TOUGH, SMUDGE RESISTANT GLASS - Hard wearing glass with an oleophobic coating, so it stands up to everyday scratches and wipes clean of fingerprints.
  • PRECISE FIT - The punch-hole camera cutout, edges and flex line up with the original, so the screen sits flush in your frame and your phone closes up properly.
  • SENT FROM NZ STOCK - Shipped from our New Zealand stock, so there's no waiting weeks for a part to arrive from overseas.

 

Part Includes:

  • Motorola Moto G06 / G06 Power OEM LCD and touch digitiser
  • 12 Month Warranty

 

Please Note

Does NOT fit the Moto G05, G15 or E15. Check in Settings, About phone, Model (or Device details, Model) for your XT number.

Please Note

The fingerprint reader is in the side power key, so it stays in your phone and isn't affected by the screen swap.

Please Note

Assembled by a third party manufacturer, so it is not an official Motorola part. The original screen is 120Hz, and this replacement may not reach 120Hz.

Specifications

  • Screen Type: OEM LCD
  • Display Size: 6.88"
  • Resolution: 720 x 1640 pixels
  • Colours: Black
  • Middle Frame: Not included - fits your existing frame
  • Warranty: 12 Months

Compatible Model Numbers

Motorola Moto G06 Motorola Moto G06
Model Number (XT Number)
  • XT2535-1
  • XT2535-2
  • XT2535-3
  • XT2535-14
Motorola Moto G06 Power Motorola Moto G06 Power
Model Number (XT Number)
  • XT2535-9
  • XT2535-13

Installation Help

installation guide

Check out the video above for assistance with this repair


helpful tips

Here are some helpful tips to assist you in completing a safe repair on your device. If you are unsure of something or have any questions, please feel free to contact us either by phone (0508 IGADGET) or by email

  • Drain the battery below 25% before you start on this repair
  • Power the phone off and take out the SIM tray before you open it.
  • The plastic back cover is held on by adhesive. Warm the edges gently with the iOpener in short bursts, as too much heat can damage the battery, then work a pick around the edge, no more than 3 to 5mm in, or you can cut the side key, antenna or camera cables.
  • Always track your screws (Phillips #00) so they go back in the right place. Draw a picture of your phone and tape the screws to it, or use a screw mat
  • Always unplug the battery before you remove any other parts. Keep metal tools away from the battery, and never bend, crush or puncture it.
  • Unplug the screen flex from the board with the spudger, then warm the front of the old screen in short bursts on a heat pad or with the iOpener and work picks in from the edge, using an opening card or the iPlastix to hold the gap. Keep metal tools out, as they can cut the flex or gouge the frame. Feed the flex out through the frame as the screen lifts away.
  • Pick the old adhesive off the frame with the tweezers, then clean every trace off with isopropyl alcohol and a dust free cloth so the new screen sits flat.
  • Connect and test the new screen before gluing it in: feed its flex through the frame, plug it and the battery in, then check the display, touch, side-key fingerprint reader, cameras and calls before you unplug the battery again. Leave the protective film and stickers on until the new screen is working properly.
  • Run a thin bead of B7000 around the frame, clear of the flex cutout, press the new screen down evenly and hold it with rubber bands or tape until the glue has set.
  • Press the back cover down all the way round so it sits flat. If the old adhesive no longer holds, fit a strip of 2mm Tesa tape where it was.

What’s In The Box

  • 1x Motorola Moto G06 / G06 Power OEM LCD Screen Replacement
Customer Reviews
0.0 Be the first to review this item
0% 
0% 
0% 
0% 
0%