Frequently Bought Together
Product Details
If your Generation 5 Apple iPod Touch won't turn on, is stuck in a boot loop, or simply won't hold a charge, this replacement battery may be what you need to fix it.
- Zero Cycle Count, therefore you have the maximum amount of cycles left
- Lithium-Ion Polymer
- Brand New materials
- Strict QC testing
- Less than 1% failure rate
- 12 Month Warranty
Please Note
This Apple iPod battery is not compatible with the 6th or 7th generation Apple iPod Touch versions
Please Note
This part requires soldering
Specifications
- Compatible Part Numbers: 616-0621, 621-0619
- Voltage: 3.7V
- Watt Hours: 3.8Whr
- Capacity: 1030mAh
- Battery Type: Li-Polymer
- Warranty: 12 Months
Compatible Model Numbers
Model Number (A Number)
- A1421
- A1509
iPod Touch 5 Model NumbersHow do I find my Model number?
Model Identifier
- iPod5,1
EMC Number
- EMC 2600
- EMC 2676
Device Number (M Number)
- MC903
- MC904
- MD714
- MD715
- MD717
- MD718
- MD720
- MD721
- MD723
- MD724
- MD749
- MD750
- ME108
- ME643
- ME978
- ME979
- MGFY2
- MGG12
- MGG32
- MGG52
- MGG72
- MGG82
Installation Help
Watch the video above for assistance in completing this repair
Remember
After completing your repair, calibrate your newly installed battery by charging it to 100% and then charging for a further two hours. Use your iPhone until it shuts off due to low battery, and finally, charge it uninterrupted to 100% again
Here is some tools you may need to help you complete the repair.
- uFix iOpener Heat bag
- iFlex opening tool
- 1mm TESA Tape
- iGadget #000 Phillips screwdriver
- Amtech NC-559-ASM 10cc Solder Flux
- Solder
- Soldering Iron
- Fine Tipped Curved Tweezers
- Black Spudger
- iGadget 5x Plastic Opening cards
- Screw Mat
Here are some helpful tips to assist you in completing a safe repair on your device. If you are unsure of something or have any quesions, please feel free to contact us either by phone (0508 IGADGET) or by email
- Always track your screws to avoid putting back in the wrong place and damaging your device. You can draw a picture of your watch and tape the screws to the right places or use a screw mat
- Always power down your device prior to working on it
- Before removing your battery, discharge the battery to below 25%. A charged lithium-ion battery can catch fire or explode if punctured or damaged
- Test the battery is functioning properly before sealing up the device
- This replacement requires soldering, be careful not to heat the battery during removal or installation
Caution
If the new battery or the battery in your device is swollen or damaged during repair, take the proper precautions
Note
You cannot dispose of old batteries in your general waste. Find recycling e-waste centres online or take to your local refuse station.
What’s In The Box
- 1x Apple iPod Touch 5 Replacement Battery