Frequently Bought Together
Product Details
If your LCD is cracked or non-responsive on your iPod Nano 7th Generation, this replacement screen is what you need to get it up and running again.
- OEM LCD
- Digitiser
- Flex Cable
- 12 Month Warranty
Please Note
This iPod Nano LCD is not compatible with the iPod Touch
Caution
Adhesive is not included
Specifications
- Part Type: LCD Screen Replacement
- Resolution: 240 x 432 pixels
- Pixel Density: 202 ppi
- Brightness: 500 cd/m2
- Warranty: 12 Months
Compatible Model Numbers
Model Number (A Number)
- A1446
iPod Nano 7 Model NumbersHow do I find my Model number?
Model Identifier
EMC Number
- EMC 2601
Device Number (M Number)
- MD481
- ME971
- MD480
- MD479
- MD475
- MD476
- MD478
- MD477
- MD744
- MKN52
- MKMX2
- MKN22
- MKMV2
- MKN02
- MKN72
Installation Help
Checkout the video above or step-by-step guide below for assistance in completing this repair
Here is some tools you may need to help you complete the repair.
- Phillips #000 Screwdriver
- Fine Tipped Curved Tweezers
- Black Spudger
- TESA Tape 1mm
- uFix iOpener Microwave opening tool
- iSclack Suction Cup opening tool
- Screw Mat
Here are some helpful tips to assist you in completing a safe repair on your device. If you are unsure of something or have any quesions, please feel free to contact us either by phone (0508 IGADGET) or by email
- Always track your screws to avoid putting back in the wrong place and damaging your device. You can draw a picture of your watch and tape the screws to the right places or use a screw mat
- Always power down your device prior to working on it
- Be careful with flex cables inside the device, some are soldered to the board so are difficult to remove if broken
- Test the screen is functioning properly before sealing up the device
- Adhesive will be needed to glue the screen back down
Whats In The Box
- 1x Apple iPod Nano 7th Gen Screen Replacement