Frequently Bought Together
Product Details
If you've dropped or damaged your iPhone 7, you may need to replace the Rear Case housing. This is an aftermarket case and comes empty and ready to be filled with your parts.
Part Includes:
- Rear Case
- Camera Lens
- Mute Switch
- Replacement Volume and Power buttons
- Replacement Sim tray (without IMEI number)
FYI
All internal components apart from the items mentioned above need to be transferred from your old chassis
Please Note
This is an aftermarket case, not an offical Apple product.
Specifications
- Type: Rear Chassis
- Colours: Black, Jet Black, Rose Gold, Silver, Gold, Red
- Warranty: 12 Months
Compatible Model Numbers
Model Number (A Number)
- A1660
- A1778
- A1779
iPhone 7 Model Numbers
Model Identifier
- iPhone9,1
- iPhone9,3
EMC Number
- EMC 3091
Device Number (M Number)
- MNAD2
- MNAK2
- MNAU2
- MNAE2
- MNAL2
- MNAV2
- MNAF2
- MNAM2
- MNAW2
- MNAC2
- MNAJ2
- MNAQ2
- MNAP2
- MNAX2
- MN9E2
- MN9J2
- MN9P2
- MN9F2
- MN9K2
- MN9Q2
- MN9G2
- MN9L2
- MN9R2
- MN9D2
- MN9H2
- MN9N2
- MN9M2
- MN9T2
- MPRV2
- MPRW2
- MQTT2
- MQTU2
- MNCF2
- MNCL2
- MNCR2
- MNCG2
- MNCM2
- MNCT2
- MNCJ2
- MNCN2
- MNCU2
- MNCE2
- MNCK2
- MNCQ2
- MNCP2
- MNCV2
- MPRX2
- MPRY2
- MQTY2
Installation Help
Check out the video above or step by step guide below for assistance in this repair
Here is some tools you may need to help you complete the repair.
- Phillips #000 Screwdriver
- P2 Pentalobe Screwdriver
- iSclack opening tool
- Suction Cup
- Fine Tipped Curved Tweezers
- iGadget 5 piece opening picks
- Black Spudger
- uFix iOpener Heat bag
- iHold Evo Screen Holder
Here are some helpful tips to assist you in completing a safe repair on your device. If you are unsure of something or have any quesions, please feel free to contact us either by phone (0508 IGADGET) or by email
- Always track your screws to avoid putting back in the wrong place and damaging your device. You can draw a picture of your phone and tape the screws to the right places or use a screw mat
- Always power down your device prior to working on it
- Make sure you always unplug the battery before attemping any component removal
- The connector to the logicboard can be tricky to align correctly so it fits into place, we recommend taking a pencil and tracing the original charging port so you know exactly where it gets positioned and lining the new charger port within the pencil lines
- Don't forget to remove the sim tray when removing the logicboard
What’s In The Box
- 1x iPhone 7 Replacement Chassis Rear Housing