iPhone 13 Pro Screen Replacement | IC3 In-Cell LCD 120Hz
iPhone 13 Pro Screen Replacement | IC3 In-Cell LCD 120Hz
1
IPH13P-12
In Stock
Regular price
NZ$74.99
Regular price
Sale price
NZ$74.99
Unit price
per
inc GST
iPhone 13 Pro Screen Replacement | IC3 In-Cell LCD 120Hz
iPhone 13 Pro Screen Replacement | IC3 In-Cell LCD 120Hz
1
IPH13P-12
In Stock
Regular price
NZ$74.99
Regular price
Sale price
NZ$74.99
Unit price
per
inc GST
- iPhone 13 Pro screen replacement with a REPART Premium TFT LCD and high colour intensity
- Fixes a cracked screen, lines, black patches, flicker and unresponsive touch
- 2532 x 1170 at 460 ppi, 120Hz refresh rate, True Tone Compatible with iOS 18 or later
- Compatible with iPhone 13 Pro models; A2483, A2636, A2638, A2639 & A2640
Frequently Bought Together
Frequently Bought Together
Product Details
Cracked your iPhone 13 Pro screen? Or is the display showing lines, black patches or flicker, or is it not responding to touch? This REPART in-cell LCD screen replacement swaps the complete display and touch digitiser on the iPhone 13 Pro (A2483, A2636, A2638, A2639 and A2640), with the metal LCD shield plate already fitted to the back.
Also available for the iPhone 13 Pro: Diagnostic OLED (no Unknown Part message) · Soft OLED (OLED picture quality)
It is built for the iPhone 13 Pro: a 6.1-inch, 2532 x 1170 panel at 460 ppi, with 550-650 cd/m2 brightness, a 120Hz refresh rate and a 95-105% sRGB colour gamut. The iPhone 13 Pro came with an OLED screen, so this LCD is a budget friendly alternative. It has a slightly thicker border and lower contrast than OLED.
- IN-CELL TECHNOLOGY - The LCD and touchscreen are in the same layer, so touch is quick and reliable, with even colour and brightness right to the edges. No delayed touch, shadows or dark patches like cheap out-of-cell (OOC) screens.
- PREMIUM LCD - A premium TFT LCD with brighter colours, whiter whites and darker blacks than other aftermarket LCD screens. One integrated driver chip runs display and touch together, for better power efficiency.
- PRECISE FIT - Chip-on-Flex (COF) bonding allows a thinner bezel, and the dimensions and cutouts match the Apple screen, so installation is a breeze.
- QUALITY TESTED - Built from quality materials and components, and rigorously tested so REPART screens outperform standard LCD screens.
- 120HZ REFRESH RATE - Smooth scrolling and animations, like the original Pro display.
- TRUE TONE CAPABLE - With iOS 18 or later, True Tone works with this screen without a transfer machine.
- COST EFFECTIVE - A much cheaper alternative to Apple's OLED screens, saving you money.
Part Includes:
- iPhone 13 Pro REPART In-Cell LCD Screen and Touch Digitiser Assembly
- Metal LCD shield plate (pre-installed)
- iPhone 13 Pro Screen Gasket Adhesive
- 12 Month Warranty
Please Note
Does NOT fit iPhone 13 or iPhone 14. They look alike but the screens differ. Check in Settings, General, About for your model.
Please Note
Face ID and True Tone (iOS 18 or later) keep working once you move the front sensor assembly across from your old screen.
Please Note
Third party screen, not an Official Apple product. iOS will list it as an Unknown Part. This is normal.
Specifications
- Screen Type: TFT-LCD
- Screen Brand: REPART
- Touch System Type: In-Cell
- Driver IC: TDDI integrated chip
- Backlight Type: ESR
- Display Size: 6.1"
- Refresh Rate: 120Hz
- Polariser Viewing Angle: 360 degrees
- True Tone Capable: Yes (iOS 18 or later)
- IC Transferable: Yes
- Pixel Density: 460ppi
- Resolution: 1170 x 2532
- Colour Temp: 6500-7500k
- Colour Gamut: 95-105% sRGB
- Colours: Black
- Brightness: 550-650 cd/m2
- Brightness Uniformity: 90%
- Glass Rating: 9H, oleophobic (anti-fingerprint) coating
- Pairing: Not paired. Shows as an Unknown Part, but the screen works normally.
- Warranty: 12 Months
How do I find my Model number?
iPhone 13 Pro
Compatible Model Numbers
iPhone 13 ProModel Number (A Number)
- A2483
- A2636
- A2638
- A2639
- A2640
iPhone 13 Pro Model NumbersHow do I find my Model number?
Model Identifier
- iPhone14,2
EMC Number
- EMC 4000
- EMC 4002
- EMC 4033
- EMC 4034
Device Number (M Number)
- MLTT3
- MLU03
- MLU73
- MLUD3
- MLTQ3
- MLTX3
- MLU33
- MLUA3
- MLTR3
- MLTY3
- MLU43
- MLUC3
- MLTP3
- MLTW3
- MLU13
- MLU93
- MNDT3
- MNDU3
- MNDV3
- MNDW3
- MLUK3
- MLUU3
- MLV03
- MLV73
- MLUF3
- MLUP3
- MLUW3
- MLV33
- MLUH3
- MLUQ3
- MLUY3
- MLV43
- MLUE3
- MLUN3
- MLUV3
- MLV13
- MNDX3
- MNDY3
- MNE03
- MNE13
- MLVD3
- MLVP3
- MLVU3
- MLW03
- MLVA3
- MLVF3
- MLVN3
- MLVW3
- MLVC3
- MLVK3
- MLVQ3
- MLVY3
- MLV93
- MLVE3
- MLVH3
- MLVV3
- MNE23
- MNE33
- MNE43
- MNE53
- MLT83
- MLTE3
- MLTJ3
- MLTN3
- MLT63
- MLTC3
- MLTG3
- MLTL3
- MLT73
- MLTH3
- MLTM3
- MLT53
- MLT93
- MLTF3
- MLTK3
- MNDN3
- MNDP3
- MNDQ3
- MNDR3
- MLW43
- MLW83
- MLWD3
- MLWH3
- MLW23
- MLW63
- MLWA3
- MLWF3
- MLW33
- MLW73
- MLWC3
- MLWG3
- MLW13
- MLW53
- MLW93
- MLWE3
More info Less info
Installation Help
Check out the video above or the step by step guide below for assistance with this repair
iFixit iPhone 13 Pro Screen Replacement Guide
Here are some tools you may need to help you complete the repair.
Please note: A discounted simple toolset with the tools you need is available in a pop-up when you add this product to cart
- #000 1.5mm Metal Phillips Screwdriver Tool (PH000)
- P2 Metal Pentalobe 0.8mm Screwdriver Tool
- Y000 Metal Triwing Tri-Point 0.6mm Screwdriver Tool
- Large Blue Suction Cup Opening Tool
- Mechanic AK-15 King ESD Anti-Static Stainless Steel Red Curved Tweezers
- iGadget Plastic Triangle Opening Picks (set of 5)
- 5x iGadget Plastic Flexible Opening Cards
- Nylon Antistatic Spudger Pry Tool
- Or get the P2, Y000 and #000 screwdrivers, suction cup, tweezers, opening pick, opening card and spudger together in our 8 Piece iPhone Repair Toolkit
- iSclack Evo (Gen 3) Suction Cup Opening Tool for phones and tablets by Dottorpod
- uFix iOpener Microwaveable Heated Bag Opening Tool
- iHold Evo Screen Holding Opening Tool for iPads and iPhones with USB-C Adapter by Dottorpod
- 1mm Tesa Tape 61395 Roll Double Sided Adhesive Tape (50m)
Here are some helpful tips to assist you in completing a safe repair on your device. If you are unsure of something or have any questions, please feel free to contact us either by phone (0508 IGADGET) or by email
- Drain the battery below 25% before you start on this repair
- Always power down your device prior to working on it
- Track your screws, they are different lengths: two 6.8mm P2 pentalobe screws at the bottom, three 1.3mm Y000 on the battery and display cover, two 1.1mm Y000 plus one 1.5mm and one 1.8mm Phillips on the front sensor cover, and three 1.4mm Y000 on the sensor bracket. Use a screw mat to keep them in place
- Remove the two pentalobe screws beside the Lightning port, warm the bottom edge, lift the screen with a suction cup and keep picks no more than 3mm deep (2mm on the left edge, where the display cables run). The screen opens like a book from the right side, hinged on the left
- Disconnect the battery first, then the display cable, then the front sensor cable under its own cover, before attempting any component removal
- Carefully transfer the front sensor assembly (proximity sensor, ambient light sensor, microphone and flood illuminator) from your old screen - warm the top edge and use a spudger to gently pry underneath the flex cable to loosen the glue. If the flex cable breaks, you will lose Face ID features. Watch the video above before attempting removal
- Test touch, display, earpiece, proximity and Face ID before sealing the phone, and don't peel off the protective film or any stickers until it's all working
- Opening your iPhone 13 Pro breaks its factory water-resistance seal. Fit the new screen gasket adhesive included in the box when you reassemble it.
- Once the repair is finished, turn True Tone on in Settings > Display & Brightness (iOS 18 or later)
What’s In The Box
- 1x iPhone 13 Pro REPART In-Cell LCD Screen Replacement (metal LCD shield plate pre-installed)
- 1x iPhone 13 Pro Screen Gasket Adhesive
