Frequently Bought Together
Product Details
If you have removed or replaced your battery, you will need a new adhesive strip so that you can stick the battery down to the rear case.
The adhesive is pre-cut and is the same size as the original for a perfect fit
Please Note
This is a one-use product. If you remove this adhesive, you will need to replace it
Specifications
- Type: Precut adhesive
- Warranty: 12 Months
Compatible Model Numbers
Model Number (A Number)
- A2160
- A2215
- A2217
iPhone 11 Pro Model NumbersHow do I find my Model number?
Model Identifier
- iPhone12,3
EMC Number
- EMC 3305
- EMC 3307
Device Number (M Number)
- MW9C2
- MW9D2
- MW9E2
- MW9F2
- MW9G2
- MW9H2
- MW9J2
- MW9K2
- MW9L2
- MW9M2
- MW9N2
- MW9P2
- MW9Q2
- MW9R2
- MW9T2
- MW9U2
- MW9V2
- MW9W2
- MW9X2
- MW9Y2
- MWA12
- MWA32
- MWA42
- MWA52
- MWA62
- MWA72
- MWA82
- MWA92
- MWAA2
- MWAD2
- MWAE2
- MWAF2
- MWAG2
- MWAH2
- MWAJ2
- MWAL2
- MWAM2
- MWAP2
- MWAQ2
- MWAR2
- MWAT2
- MWAU2
- MWAV2
- MWAW2
- MWAX2
- MWAY2
- MWC02
- MWC12
- MWC22
- MWC32
- MWC52
- MWC62
- MWC72
- MWC82
- MWC92
- MWCC2
- MWCD
- MWCE2
- MWCF2
- MWCG2
- MWCH2
- MWCJ2
- MWCK2
- MWCL2
- MWCM2
- MWCN2
- MWCP2
- MWCQ2
- MWCR2
- MWCT2
- MWCU2
- MWCV2
- MWD92
- MWDA2
- MWDC2
- MWDD2
- MWDE2
- MWDF2
- MWDG2
- MWDH2
- MWDJ2
- MWDK2
- MWDL2
- MWDM2
Installation Help
Watch the video above or checkout the step-by-step guide below as they contain removal of the battery adhesive
iFixit iPhone 11 Pro Battery Replacement Guide
Here is some tools you may need to help you complete the repair.
- Phillips #000 Screwdriver
- P2 Pentalobe Screwdriver
- Y000 Triwing tri-point Screwdriver
- iSclack opening tool
- Suction Cup
- Fine Tipped Curved Tweezers
- iGadget 5 piece opening picks
- Black Spudger
- uFix iOpener Heat bag
- iHold Evo Screen Holder
Here are some helpful tips to assist you in completing a safe repair on your device. If you are unsure of something or have any quesions, please feel free to contact us either by phone (0508 IGADGET) or by email
- Always track your screws to avoid putting back in the wrong place and damaging your device. You can draw a picture of your phone and tape the screws to the right places or use a screw mat
- Always power down your device prior to working on it
- Make sure you always unplug the battery before attemping any component removal
- Before removing your battery, discharge the battery to below 25%. A charged lithium-ion battery can catch fire or explode if punctured or damaged
- Removing the old battery adhesive can be frustrating, we recommend grabbing the tabs with tweezers and rolling the adhesive up the tweezers until it is gone. It may also be helpful to remove modular components that might be in the way at the bottom for better access. Also check out this video for more adhesive removal tips.
Caution
If the new battery or the battery in your device is swollen or damaged during repair, take the proper precautions
What’s In The Box
- 1x iPhone 11 Pro Replacement Battery Adhesive