Frequently Bought Together
Product Details
If the glass is cracked or damaged on your Series 7/8 Apple Watch, this replacement glass is what you need to get it looking new again
- Replacement Glass
- 12 Month Warranty
Please Note
This Apple Watch Glass is not compatible with the 45mm version of the Series 7/8 Apple Watch
Caution
This is a tricky repair, check out videos prior to attempting this repair
Specifications
- Part Type: Glass
- Watch Size: 41mm
- Warranty: 12 Months
Compatible Model Numbers
Model Number (A Number)
- A2473
Series 7 41mm Model NumbersHow do I find my Model number?
Model Identifier
- Watch6,6
EMC Number
- EMC 3982
Device Number (M Number)
- MKN03
- MKN33
Model Number (A Number)
- A2475
- A2476
Series 7 41mm Model NumbersHow do I find my Model number?
Model Identifier
- Watch6,8
EMC Number
- EMC 3984
Device Number (M Number)
- MKHG3
- MKHY3
- MKHL3
- MKLK3
- ML8U3
- MKJ33
- MKLY3
- ML913
Model Number (A Number)
- A2770
Series 8 41mm Model NumbersHow do I find my Model number?
Model Identifier
- Watch6,14
EMC Number
- EMC 8094
Device Number (M Number)
- MNU93
Model Number (A Number)
- A2772
- A2773
- A2857
Series 8 41mm Model NumbersHow do I find my Model number?
Model Identifier
- Watch6,16
EMC Number
Device Number (M Number)
- MNUX3
- MNV13
- MNVF3
- MNHY3
- MNJ23
- MNJM3
Installation Help
Watch the video above for assistance in completing this repair
Here is some tools you may need to help you complete the repair.
- #11 Point Knife Blades x5
- uFix iOpener Heat bag
- iFlex opening tool
- 1mm TESA Tape
- Fine Tipped Curved Tweezers
- Black Spudger
- Molybdenum Wire with handles
- UV LOCA Glue
- iGadget 5x Plastic Opening cards
- Screw Mat
Here are some helpful tips to assist you in completing a safe repair on your device. If you are unsure of something or have any quesions, please feel free to contact us either by phone (0508 IGADGET) or by email
- Always track your screws to avoid putting back in the wrong place and damaging your device. You can draw a picture of your watch and tape the screws to the right places or use a screw mat
- Always power down your device prior to working on it
- Make sure you always unplug the battery before attemping any component removal
- When attempting to remove the screen, be careful not to push the blade or iFlex tool in too far or too hard, doing so may cause damage to the internal parts. Only 3mm depth is required to cut the adhesive. Draw a mark on your tool to help with depth management.
- Test the LCD and touch is functioning properly before sealing together
- You can either use LOCA or OCA to stick the LCD and glass replacement together, OCA requires machines to remove bubbles etc, LOCA is the easiest for a DIY repair
- Familiarise yourself with the repair first, this can be quite a tricky repair for first timers
What’s In The Box
- 1x Apple Watch 7/8 41mm Glass replacement