Frequently Bought Together
Product Details
When working on the inside of your 44mm Apple Watch Series 5/Series SE/Series SE2 model, it is easy to cut the force touch sensor when attempting to remove the screen. Restore force touch functions while also adhering the screen to the chassis with this gasket, no need to cut and shape new adhesive to fit the frame, it is precut to size!
Installation adhesive for the two sides of the gasket is pre-attached.
Please Note
This Apple Watch force touch gasket is not compatible with the 40mm version of the Series 5/Series SE/Series SE2 Apple Watch
Specifications
- Adhesive Type: Double-sided
- Gaslet Size: 44mm
- Warranty: 12 Months
Compatible Model Numbers
Model Number (A Number)
- A2093
Series 5 44mm GPS Model NumbersHow do I find my Model number?
Model Identifier
- Watch5,2
EMC Number
- EMC 3318
Device Number (M Number)
- MWT32
- MWT42
- MWT52
- MWT62
- MWT72
- MWVD2
- MWVF2
- MX3V2
Model Number (A Number)
- A2095
- A2157
Series 5 44mm GPS+LTE Model NumbersHow do I find my Model number?
Model Identifier
- Watch5,4
EMC Number
- EMC 3320
Device Number (M Number)
- MWQK2
- MWQL2
- MWQM2
- MWQN2
- MWQP2
- MWQQ2
- MWQR2
- MWQT2
- MWQU2
- MWQV2
- MWQW2
- MWQX2
- MWQY2
- MWR02
- MWR12
- MWR22
- MWR32
- MWR42
- MWR52
- MWR62
- MWR72
- MWR82
- MWR92
- MWRA2
- MWVY2
- MWW12
- MWW32
- MWW52
- MWW62
- MWW92
- MWWC2
- MWWE2
- MWWG2
- MWWH2
- MWWJ2
- MWWM2
- MX392
- MX3A2
- MX3E2
- MX5C2
- MXR12
Model Number (A Number)
- A2352
SE 44mm GPS Model NumbersHow do I find my Model number?
Model Identifier
- Watch5,10
EMC Number
- EMC 3486
Device Number (M Number)
- MYDR2
- MYYK2
Model Number (A Number)
- A2354
- A2356
SE 44mm GPS+LTE Model NumbersHow do I find my Model number?
Model Identifier
- Watch5,12
EMC Number
- EMC 3488
Device Number (M Number)
- MYEP2
- MG063
- MYEX2
- MG0A3
Model Number (A Number)
- A2723
SE 44mm GPS Model NumbersHow do I find my Model number?
Model Identifier
- Watch6,11
EMC Number
- EMC 8091
Device Number (M Number)
- MNTD3
Model Number (A Number)
- A2727
- A2724
- A2856
SE 44mm GPS+LTE Model NumbersHow do I find my Model number?
Model Identifier
- Watch6,13
EMC Number
- EMC 8093
Device Number (M Number)
- MNTW3
- MNPT3
- MNPW3
Installation Help
Checkout the step-by-step guide below for assistance in completing this repair as it is similar to the Series 4
iFixit Apple Watch Force Touch Replacement Guide
Here is some tools you may need to help you complete the repair.
- #11 Point Knife Blades x5
- uFix iOpener Heat bag
- iFlex opening tool
- iGadget Y000 Triwing Tri-Point Screwdriver
- Fine Tipped Curved Tweezers
- Black Spudger
- iGadget 5x Plastic Opening cards
- Screw Mat
Here are some helpful tips to assist you in completing a safe repair on your device. If you are unsure of something or have any quesions, please feel free to contact us either by phone (0508 IGADGET) or by email
- Always track your screws to avoid putting back in the wrong place and damaging your device. You can draw a picture of your watch and tape the screws to the right places or use a screw mat
- Always power down your device prior to working on it
- Make sure you always unplug the battery before attemping any component removal
- Before removing your battery, discharge the battery to below 25%. A charged lithium-ion battery can catch fire or explode if punctured or damaged
- When attempting to remove the screen, be careful not to push the blade or iFlex tool in too far or too hard, doing so may cause damage to the internal parts. Only 3mm depth is required to cut the adhesive. Draw a mark on your tool to help with depth management.
- Make sure you align and place the gasket the right way up so it clips in correctly on the watch, take note of how the previous force touch was placed
- When removing the battery with a pry bar, be careful not to go down too far as the display cables route underneath the battery. Measure the depth of the new battery, then on a plastic pick, measure and draw a line to assist with depth management
- Make sure all residue is removed and cleaned prior to installing the new adhesive, if not done correctly the screen may seperate from the frame. We recommend cleaning the frame with isopropyl alchohol wipes
Caution
If the battery in your device is swollen or damaged during repair, take the proper precautions
What’s In The Box
- 1x Apple Watch Series 5/Series SE/Series SE2 44mm Force Touch Gasket and Adhesive