Frequently Bought Together
Product Details
Replace your Near Field Communication antenna (NFC) which is responsilbe for the contactless payment options on your Original Series and Series 1 Apple Watch
- Replacement NFC Antenna
- 12 Month Warranty
Please Note
This Apple Watch NFC is not compatible with the 42mm version of the Original or Series 1 Apple Watch
Caution
Microsoldering is required to install this part
Specifications
- Watch Size: 38mm
- Connection: Soldering
- Warranty: 12 Months
Compatible Model Numbers
Model Number (A Number)
- A1553
Original Series 38mm Model NumbersHow do I find my Model number?
Model Identifier
- Watch1,1
EMC Number
- EMC 2870
Device Number (M Number)
- MJ2T2
- MJ2U2
- MJ2V2
- MJ2W2
- MJ2X2
- MJ2Y2
- MJ302
- MJ312
- MJ322
- MJ332
- MJ362
- MJ3A2
- MJ3E2
- MJ3F2
- MJ3G2
- MJ3K2
- MJ3L2
- MJ8P2
- MJYK2
- MKL52
- MLC02
- MLC22
- MLC32
- MLCF2
- MLCG2
- MLCH2
- MLCJ2
- MLCK2
- MLCL2
- MLCN2
- MLCP2
- MLE62
- MLLD2
- MME92
- MMEC2
- MMF02
- MMF12
- MMF22
- MMF32
- MMF42
- MMF52
- MMF62
- MMF82
- MMF92
- MMFD2
- MMFH2
- MMFK2
Model Number (A Number)
- A1802
Series 1 38mm Model NumbersHow do I find my Model number?
Model Identifier
- Watch2,6
EMC Number
- EMC 3102
Device Number (M Number)
- MNNG2
- MNNH2
- MNNJ2
- MP022
- MQ102
Installation Help
Watch the video above for assistance in completing this repair
Here is some tools you may need to help you complete the repair.
- #11 Point Knife Blades x5
- uFix iOpener Heat bag
- iFlex opening tool
- iGadget Y000 Triwing Tri-Point Screwdriver
- Fine Tipped Curved Tweezers
- Black Spudger
- Soldering Iron
- iGadget 5x Plastic Opening cards
- Screw Mat
Here are some helpful tips to assist you in completing a safe repair on your device. If you are unsure of something or have any quesions, please feel free to contact us either by phone (0508 IGADGET) or by email
- Always track your screws to avoid putting back in the wrong place and damaging your device. You can draw a picture of your watch and tape the screws to the right places or use a screw mat
- Always power down your device prior to working on it
- Make sure you always unplug the battery before attemping any component removal
- When attempting to remove the screen, be careful not to push the blade or iFlex tool in too far or too hard, doing so may cause damage to the internal parts. Only 3mm depth is required to cut the adhesive. Draw a mark on your tool to help with depth management.
- Microsoldering skills are required to complete this repair
What’s In The Box
- 1x Apple Watch Original Series/Series 1 38mm NFC Antenna