
Frequently Bought Together
Product Details
Is your Samsung Galaxy S20 FE, A52, A52 5G or A52s draining fast, shutting down early or swelling? A worn battery is usually the cause. These phones all use the same battery, Samsung model EB-BG781ABY, and this is a new 4500mAh replacement for it.
- ZERO CYCLE CELL - A brand new cell, never used in a phone, so you start with its full life.
- FULL 4500mAh CAPACITY - Rated 4370mAh and 4500mAh typical, the same as the battery Samsung fitted to these phones.
- QUALITY TESTED - Strict QC testing, with a failure rate under 1%.
- SENT FROM NZ STOCK - Shipped from our New Zealand stock, so there's no waiting weeks for a part to arrive from overseas.
Part Includes:
- Samsung Galaxy S20 FE / A52 / A52s Replacement Battery
- Battery Adhesive
- 12 Month Warranty
Please Note
Does NOT fit the Galaxy S20, S21 FE, A72, A53 or A54. Check in Settings, About phone for your model.
Please Note
Back cover adhesive is not included. You'll need new adhesive, such as 2mm Tesa tape, to reseal the back.
Please Note
Aftermarket battery, not an official Samsung part. It works just like the original.
Specifications
- Battery Model: EB-BG781ABY
- Voltage: 3.86V
- Rated Capacity: 4370mAh, 16.87Wh
- Typical Capacity: 4500mAh, 17.37Wh
- Battery Type: Lithium-ion polymer
- Condition: Brand new cell
- Warranty: 12 Months
Compatible Model Numbers
Samsung Galaxy A52s 5GModel Number (SM Number)
- SM-A528B
- SM-A528B/DS
Samsung Galaxy A52Model Number (SM Number)
- SM-A525F
- SM-A525F/DS
- SM-A525M
- SM-A525M/DS
Samsung Galaxy A52 5GModel Number (SM Number)
- SM-A526B
- SM-A526B/DS
- SM-A526U
- SM-A526U1
- SM-A526W
- SM-A5260
Samsung Galaxy S20 FE 5GModel Number (SM Number)
- SM-G781B
- SM-G781B/DS
- SM-G781U
- SM-G781U1
- SM-G781V
- SM-G781W
- SM-G781N
- SM-G7810
Samsung Galaxy S20 FE (4G)Model Number (SM Number)
- SM-G780F
- SM-G780F/DSM
- SM-G780G
- SM-G780G/DS
Installation Help
Check out the video above or the step by step guide below for assistance with this repair
iFixit Samsung Galaxy S20 FE 5G Battery Replacement Guide
Remember
After completing your repair, calibrate your newly installed battery by charging it to 100% and then charging for a further two hours. Use your phone until it shuts off due to low battery, and finally, charge it uninterrupted to 100% again
Here are some tools you may need to help you complete the repair.
Please note: A discounted simple toolset with the tools you need is available in a pop-up when you add this product to cart
- #00 Metal Phillips 2.0mm Screwdriver Tool (PH00)
- uFix iOpener Microwaveable Heated Bag Opening Tool
- Large Blue Suction Cup Opening Tool
- iGadget Plastic Triangle Opening Picks (set of 5)
- 5x iGadget Plastic Flexible Opening Cards
- Nylon Antistatic Spudger Pry Tool
- Mechanic AK-15 King ESD Anti-Static Stainless Steel Red Curved Tweezers
- iGadget Plastic Alcohol 200mL Bottle with Pump Top
- Samsung Galaxy S20 FE/A52/A52s Battery Adhesive Replacement
- 2mm Tesa Tape 61395 Roll Double Sided Adhesive Tape (100m)
- iGadget Universal Magnetic Work Project Mat with Marker (30cm x 25cm)
Here are some helpful tips to assist you in completing a safe repair on your device. If you are unsure of something or have any questions, please feel free to contact us either by phone (0508 IGADGET) or by email
- Drain the battery below 25% and power the phone off before you start. A charged lithium-ion battery can catch fire if it's punctured or damaged
- Warm each edge of the plastic back cover with the iOpener in short bursts, as too much heat warps it. Lift it with a suction cup and work an opening pick around the edge
- Track your screws on a magnetic mat or tape them to a drawing of your phone, so each one goes back in the right place
- Unplug the battery as soon as you can reach it, before you remove anything else. Keep metal tools away from the battery, and never bend, crush or puncture it.
- Remove the screws on the board cover and loudspeaker. On the S20 FE the cover, wireless charging coil and loudspeaker come out as one piece; the A52 models have no coil. Unplug the battery from the bottom of the board
- Warm the screen side for about two minutes to soften the battery glue, then lift the battery slowly with a suction cup and a plastic card. Use a few drops of isopropyl alcohol only if it won't let go, and never force it
- On the A52 models the main flex connector at the board end comes loose easily. Press it down firmly until it clicks when you put the phone back together
- Clean off any old adhesive and fit the new battery adhesive from the box. Press the battery connector down until it clicks, then check the phone powers on and charges before you close it up
- Clean off the old back cover adhesive and fit the new adhesive before you close it up, then press the back down evenly for a few minutes
Caution
If the new battery or the battery in your device is swollen or damaged during repair, take the proper precautions
Note
You cannot dispose of old batteries in your general waste. Find recycling e-waste centres online or take to your local refuse station.
What's In The Box
- 1x Samsung Galaxy S20 FE / A52 / A52s Replacement Battery
- 1x Replacement Battery Adhesive

In Stock