Check out the video above or the step by step guide below for assistance with this repair

iFixit MacBook Pro 13" M2 2022 Trackpad Replacement Guide

Here are some tools you may need to help you complete the repair.

• P5 Metal Pentalobe 1.2mm Screwdriver Tool
• T5 Torx Screwdriver | MacBook Logic Board and Battery Repairs
• Or get the P5 and T5 together in our 11 Piece Universal Repair Tool Kit
• Large Blue Suction Cup Opening Tool
• iGadget Plastic Triangle Opening Picks (set of 5)
• Nylon Antistatic Spudger Pry Tool
• ESD Anti-Static Stainless Steel Curved Tweezers | ESD 15
• uFix iOpener Microwaveable Heated Bag Opening Tool
• iGadget Universal Magnetic Work Project Mat with Marker (30cm x 25cm)

Here are some helpful tips to assist you in completing a safe repair on your device. If you are unsure of something or have any questions, please feel free to contact us either by phone (0508 IGADGET) or by email

• Turn off Auto Boot first so the MacBook doesn't switch on when you open it: on macOS Sequoia or later run sudo nvram BootPreference=%00 in Terminal, and sudo nvram -d BootPreference to undo it. On older macOS, keep the lid closed while it is plugged in
• Always power down your device and unplug the battery before you remove any other parts. Keep metal tools away from the battery, and never bend, crush or puncture it
• The bottom case screws are P5 and every screw inside is T5, including the cable bracket and the trackpad screws. Track your screws on a magnetic work mat or tape them to a drawing of your laptop
• Lift the front edge of the bottom case with a suction cup and run an opening pick round the edge to release the clips
• The trackpad cable is stuck down. Warm it with an iOpener and peel it up slowly, then lift the cable connectors with a spudger or tweezers, never the sockets
• Open the display slightly as the trackpad comes out, so its edge clears the top case
• A Force Touch trackpad has no moving click. If it feels dead after fitting, check its cable is fully seated, then restart the MacBook