iPad Pro 9.7 Battery Replacement | 7306mAh | A1664
iPad Pro 9.7 Battery Replacement | 7306mAh | A1664
Regular price
NZ$49.99
Regular price
Sale price
NZ$49.99
Unit price
per
inc GST
iPad Pro 9.7 Battery Replacement | 7306mAh | A1664
iPad Pro 9.7 Battery Replacement | 7306mAh | A1664
Regular price
NZ$49.99
Regular price
Sale price
NZ$49.99
Unit price
per
inc GST
Email me when back in stock
DIY DIFFICULTY
DifficultAbout 2 to 3 hours
The glued screen, upper speaker and logic board come out first, then the glued battery is freed with alcohol and plastic cards.
- Brand new 7306mAh battery with adhesive pre-attached, Apple battery model A1664
- Replaces a battery that drains fast, won't hold a charge or shuts down early
- Compatible with iPad Pro 9.7-inch models (A1673 Wi-Fi, A1674 and A1675 Wi-Fi + Cellular)
Frequently Bought Together
Frequently Bought Together
Product Details
Is your iPad Pro 9.7-inch (2016) draining fast, shutting down early or not holding a charge? A worn battery is usually the cause. This is a new 7306mAh replacement, Apple battery model A1664.
- BRAND NEW CELL - A new battery, never used in an iPad, so you start with its full life.
- FULL 7306mAh CAPACITY - 7306mAh, the same capacity as the battery Apple fitted to the iPad Pro 9.7.
- SENT FROM NZ STOCK - Shipped from our New Zealand stock, so there's no waiting weeks for a part to arrive from overseas.
Part Includes:
- iPad Pro 9.7 Replacement Battery
- Pre-attached battery adhesive
- 12 Month Warranty
Please Note
Does NOT fit the original iPad Air, iPad 5 or iPad 6, which are thicker and take a larger battery, or the larger iPad Pro 10.5". Check the A-number on the back of your iPad, or tap Model Number in Settings, General, About to see it. For the iPad Air 2, see our iPad Air 2 battery page.
Please Note
Battery adhesive pre-attached, peel the liner and fit. To reseal the screen you'll need new adhesive, such as 2mm Tesa tape.
Please Note
Aftermarket battery, not an official Apple part. It works just like the original.
Specifications
- Battery Model: A1664
- Voltage: 3.82V
- Capacity: 7306mAh, 27.91Wh
- Battery Type: Lithium-ion polymer
- Condition: Brand new cell
- Pairing: Not needed. iPad batteries aren't paired, so no Unknown Part message.
- Warranty: 12 Months
How do I find my Model number?
iPad Pro 9.7" (2016) Wi-Fi
iPad Pro 9.7" (2016) Wi-Fi + Cellular
Compatible Model Numbers
iPad Pro 9.7" (2016) Wi-FiModel Number (A Number)
- A1673
iPad Pro 9.7" (2016) Wi-Fi Model Numbers
Model Identifier
- iPad6,3
EMC Number
- EMC 2976
Device Number (M Number)
- MLMN2
- MLMP2
- MLMQ2
- MLMV2
- MLMW2
- MLMX2
- MLMY2
- MLN02
- MLN12
- MM172
- MM192
- MM1A2
More info Less info
iPad Pro 9.7" (2016) Wi-Fi + CellularModel Number (A Number)
- A1674
- A1675
iPad Pro 9.7" (2016) Wi-Fi + Cellular Model Numbers
Model Identifier
- iPad6,4
EMC Number
- EMC 2977
Device Number (M Number)
- MLPW2
- MLPX2
- MLPY2
- MLQ32
- MLQ42
- MLQ52
- MLQ62
- MLQ72
- MLQ82
- MLYJ2
- MLYL2
- MLYM2
More info Less info
Installation Help
Check out the video above or the step by step guide below for assistance with this repair
iFixit iPad Pro 9.7" Battery Replacement Guide
Remember
After completing your repair, calibrate your newly installed battery by charging it to 100% and then charging for a further two hours. Use your iPad until it shuts off due to low battery, and finally, charge it uninterrupted to 100% again
Here are some tools you may need to help you complete the repair.
Please note: A discounted simple toolset with the tools you need is available in a pop-up when you add this product to cart
- #00 Metal Phillips 2.0mm Screwdriver Tool (PH00)
- uFix iOpener Microwaveable Heated Bag Opening Tool
- CPB 320 Repair Heat Pad for mobile phones and tablets
- Large Blue Suction Cup Opening Tool
- iGadget Plastic Triangle Opening Picks (set of 5)
- 5x iGadget Plastic Flexible Opening Cards
- Nylon Antistatic Spudger Pry Tool
- Mechanic AK-15 King ESD Anti-Static Stainless Steel Red Curved Tweezers
- iGadget Plastic Alcohol 200mL Bottle with Pump Top
- 2mm Tesa Tape 61395 Roll Double Sided Adhesive Tape (100m)
- iGadget Universal Magnetic Work Project Mat with Marker (30cm x 25cm)
Here are some helpful tips to assist you in completing a safe repair on your device. If you are unsure of something or have any questions, please feel free to contact us either by phone (0508 IGADGET) or by email
- Drain the battery below 25% and power the iPad off before you start. A charged lithium-ion battery can catch fire if it's punctured or damaged
- The screen is glued to the frame. Warm the edges with the iOpener or heat mat in short passes, lift it with a suction cup and work opening picks round slowly, keeping them shallow so they don't catch the display cables
- Track your screws on a magnetic mat or tape them to a drawing of your iPad, so each one goes back in the right place
- Disconnect or block the battery as soon as you can reach it, before you remove anything else. Keep metal tools away from the battery, and never bend, crush or puncture it.
- Block the battery connector with a battery blocker or a plastic card before the logic board comes out, and track every screw
- The battery is glued to the back case. Drip isopropyl alcohol under each edge, wait a minute, then work plastic cards under the cells slowly. Never use metal tools on the battery, and never bend the cells
- Remove every bit of the old battery adhesive and clean the case with isopropyl alcohol. Peel the liner from the new battery's adhesive strips, press the battery into place and reconnect it, then check the iPad powers on and charges before you close it up
- Fit new adhesive, such as 2mm Tesa tape, round the frame before you press the screen back on, then hold it down evenly while the adhesive sets
- If your iPad doesn't turn on or show a picture after the repair, force restart it: press and hold the top button and the Home button together until the Apple logo appears
Caution
If the new battery or the battery in your device is swollen or damaged during repair, take the proper precautions
Note
You cannot dispose of old batteries in your general waste. Find recycling e-waste centres online or take to your local refuse station.
What's In The Box
- 1x iPad Pro 9.7 Replacement Battery with pre-attached adhesive
