Check out the video above or the step by step guide below for assistance with this repair

iFixit iPhone 7 Plus Screen Replacement Guide

Here are some tools you may need to help you complete the repair.

Please note: A discounted simple toolset with the tools you need is available in a pop-up when you add this product to cart

• P2 Metal Pentalobe 0.8mm Screwdriver Tool
• #000 1.5mm Metal Phillips Screwdriver Tool (PH000)
• Y000 Metal Triwing Tri-Point 0.6mm Screwdriver Tool
• Large Blue Suction Cup Opening Tool
• Mechanic AK-15 King ESD Anti-Static Stainless Steel Red Curved Tweezers
• iGadget Plastic Triangle Opening Picks (set of 5)
• Nylon Antistatic Spudger Pry Tool
• Or get the P2, Y000 and #000 screwdrivers, suction cup, tweezers, opening pick and spudger together in our 8 Piece iPhone Repair Toolkit
• iSclack Evo (Gen 3) Suction Cup Opening Tool for phones and tablets by Dottorpod
• uFix iOpener Microwaveable Heated Bag Opening Tool
• iHold Evo Screen Holding Opening Tool for iPads and iPhones with USB-C Adapter by Dottorpod
• iGadget Plastic Alcohol 200mL Bottle with Pump Top
• iGadget Universal Magnetic Work Project Mat with Marker (30cm x 25cm)

Here are some helpful tips to assist you in completing a safe repair on your device. If you are unsure of something or have any questions, please feel free to contact us either by phone (0508 IGADGET) or by email

• Drain the battery below 25% before you start on this repair
• Always power down your device prior to working on it
• Track your screws on a screw mat or tape them to a drawing of your phone, and keep each set separate. Screws put back in the wrong hole can damage the logic board
• Warm the bottom edge, take out the two P2 pentalobe screws and lift the screen with the suction cup. Only push picks a few millimetres in, and stay away from the right-hand edge where the display cables are. Open the screen to the right like a book, no further than about 90 degrees
• Always unplug the battery before you remove any other parts. Keep metal tools away from the battery, and never bend, crush or puncture it.
• Carefully move the home button, the front camera and sensor cable, and the earpiece speaker across from your old screen. Use a spudger to gently lift flex cables that are glued down. Watch the video above before you start
• Test the display, touch, home button, front camera and the proximity sensor (during a call) before you close the phone, and don't peel off the protective film or any stickers until it's all working
• Clean off the old adhesive with isopropyl alcohol, then fit the new screen adhesive from the box. This phone is water resistant from the factory, but water resistance cannot be guaranteed once the phone has been opened