
Things you may need for this repair


Product Details
Lines, dead pixels or no picture on your original iPad Mini? On the iPad Mini 1 the LCD sits under a separate glass and touch digitiser, so if touch still works you only need to replace the LCD.
Also for the iPad Mini 1: Glass and Digitiser with Home Button (when the glass is cracked)
- LCD ONLY - Just the display panel, so if your glass is fine you don't pay for a new screen front.
- NON-RETINA PANEL - The 1024 x 768 panel the original iPad Mini uses, so it fits and connects like your old one.
- SAME RESOLUTION AS THE ORIGINAL - 1024 x 768 at 163 ppi, matching the display your iPad Mini came with.
- SENT FROM NZ STOCK - Shipped from our New Zealand stock, so there's no waiting weeks for a part to arrive from overseas.
Part Includes:
- 7.9-inch LCD panel
- 12 Month Warranty
Please Note
Does NOT fit the iPad Mini 2 or Mini 3, which have a sharper Retina display and take a different LCD. Check the A number on the back of your iPad.
Please Note
This part will either be brand new or a used genuine Apple LCD in full working order.
Specifications
- Type: LCD display panel only (no glass or touch)
- Display Size: 7.9-inch (diagonal)
- Resolution: 1024 x 768 pixels (163 ppi)
- Refresh Rate: 60Hz
- Pairing: Not needed. This iPad doesn't check its screen, so no Unknown Part message.
- Warranty: 12 Months
Compatible Model Numbers
iPad Mini 1 WiFiModel Number (A Number)
- A1432
iPad Mini 1 WiFi Model NumbersHow do I find my Model number?
Model Identifier
- iPad2,5
EMC Number
- EMC 2607
Device Number (M Number)
- MD528
- MD529
- MD530
- MD531
- MD532
- MD533
- MF432
iPad Mini 1 WiFi + CellularModel Number (A Number)
- A1454
- A1455
iPad Mini 1 WiFi + Cellular Model NumbersHow do I find my Model number?
Model Identifier
- iPad2,6
- iPad2,7
EMC Number
- EMC 2608
Device Number (M Number)
- MD534
- MD535
- MD536
- MD537
- MD538
- MD539
- MF442
Installation Help
Check out the video above or the step by step guide below for assistance with this repair
iFixit iPad Mini LCD Replacement Guide
Here are some tools you may need to help you complete the repair.
Please note: A discounted simple toolset with the tools you need is available in a pop-up when you add this product to cart
- #00 Metal Phillips 2.0mm Screwdriver Tool (PH00)
- uFix iOpener Microwaveable Heated Bag Opening Tool
- CPB 320 Repair Heat Pad for mobile phones and tablets
- Large Blue Suction Cup Opening Tool
- iGadget Plastic Triangle Opening Picks (set of 5)
- Nylon Antistatic Spudger Pry Tool
- Mechanic AK-15 King ESD Anti-Static Stainless Steel Red Curved Tweezers
- iGadget Plastic Alcohol 200mL Bottle with Pump Top
- Tesa 61395 Double Sided Adhesive Tape 2mm
- iGadget Universal Magnetic Work Project Mat with Marker (30cm x 25cm)
Here are some helpful tips to assist you in completing a safe repair on your device. If you are unsure of something or have any questions, please feel free to contact us either by phone (0508 IGADGET) or by email
- Drain the battery below 25% before you start on this repair
- Power the iPad off before you start, and tape over cracked glass so it lifts in one piece.
- Disconnect the battery before you unplug anything else. Keep metal tools away from it, and never bend, crush or puncture it.
- Warm the edges with the iOpener or heat pad in short passes, as too much heat can damage the battery.
- Only slip the tips of opening picks in near the front camera at the top, and keep clear of the Wi-Fi antenna along the bottom edge.
- Always track your screws on a magnetic mat, as they are different lengths.
- Refit press connectors by pressing one side then the other until they click, never the middle.
- The glass stays connected by its digitiser cable, so fold it back carefully, and keep fingerprints and dust off the new LCD.
- Test touch, the picture and the home button before you seal it, and leave the protective film on until the new LCD works.
- Clean the old adhesive off with isopropyl alcohol and lay new 2mm Tesa tape round the frame before you stick the glass back down.
What’s In The Box
- 1x iPad Mini 1 replacement LCD

In Stock