
Things you may need for this repair


Product Details
Lines, dead pixels, colour bleeding or a black screen on your iPad 9, 8 or 7? On these 10.2-inch iPads the LCD is a separate panel under the touch glass, so if touch still works you only need a new LCD.
Also for the iPad 9 / 8 / 7: Glass and Digitiser (cracked glass or touch faults) · Glass and Digitiser with Home Button
- SHARP 10.2-INCH PICTURE - 2160 x 1620 resolution at 264 ppi, the same as the display these iPads came with.
- LCD ONLY, LOWER COST - If your glass is fine and only the picture is damaged, you replace just the LCD and keep your glass and home button.
- SENT FROM NZ STOCK - Shipped from our New Zealand stock, so there's no waiting weeks for a part to arrive from overseas.
Part Includes:
- LCD display panel
- 12 Month Warranty
Please Note
Does NOT fit the iPad 10, iPad Air 3, iPad Pro 10.5" or the 9.7" iPad 5 and 6, which use different screens. Check in Settings, General, About for your model.
Please Note
LCD only. The touch glass is a separate part, so if touch has also stopped working you'll need the glass and digitiser as well.
Please Note
Brand new aftermarket LCD, not an official Apple part.
Specifications
- Display Size: 10.2-inch (diagonal)
- LCD Resolution: 2160 x 1620 pixels
- Refresh Rate: 60Hz
- Pixel Density: 264 pixels per inch (ppi)
- Type: LCD panel only (no glass or digitiser)
- Condition: Brand new
- Pairing: Not needed. This iPad doesn't check its screen, so no Unknown Part message.
- Warranty: 12 Months
Compatible Model Numbers
iPad 9 (2021) WiFiModel Number (A Number)
- A2602
iPad 9 (2021) WiFi Model Numbers
Model Identifier
- iPad12,1
EMC Number
- EMC 4045
Device Number (M Number)
- MK2L3
- MK2P3
- MK2K3
- MK2N3
iPad 9 (2021) WiFi + CellularModel Number (A Number)
- A2603
- A2604
- A2605
iPad 9 (2021) WiFi + Cellular Model Numbers
Model Identifier
- iPad12,2
EMC Number
- EMC 4046
Device Number (M Number)
- MK673
- MK6A3
- MK663
- MK693
- MK493
- MK4H3
- MK473
- MK4E3
- MK613
- MK643
- MK603
- MK633
iPad 8 (2020) WiFiModel Number (A Number)
- A2270
iPad 8 (2020) WiFi Model Numbers
Model Identifier
- iPad11,6
EMC Number
- EMC 3574
Device Number (M Number)
- MYL92
- MYLA2
- MYLC2
- MYLD2
- MYLE2
- MYLF2
iPad 8 (2020) WiFi + CellularModel Number (A Number)
- A2428
- A2429
- A2430
iPad 8 (2020) WiFi + Cellular Model Numbers
Model Identifier
- iPad11,7
EMC Number
- EMC 3575
Device Number (M Number)
- MYMH2
- MYMJ2
- MYMK2
- MYML2
- MYMM2
- MYMN2
- MYN32
- MYN52
- MYN62
- MYN72
- MYN82
- MYN92
iPad 7 (2019) WiFiModel Number (A Number)
- A2197
iPad 7 (2019) WiFi Model Numbers
Model Identifier
- iPad7,11
EMC Number
- EMC 3323
Device Number (M Number)
- MW742
- MW752
- MW762
- MW772
- MW782
- MW792
iPad 7 (2019) WiFi + CellularModel Number (A Number)
- A2198
- A2199
- A2200
iPad 7 (2019) WiFi + Cellular Model Numbers
Model Identifier
- iPad7,12
EMC Number
- EMC 3324
Device Number (M Number)
- MW6A2
- MW6C2
- MW6D2
- MW6E2
- MW6F2
- MW6G2
- MW6P2
- MW6Q2
- MW6R2
- MW6T2
- MW6U2
- MW6V2
- MW6W2
- MW6X2
- MW6Y2
- MW702
- MW712
- MW722
Installation Help
Check out the video above or the step by step guide below for assistance with this repair
iFixit iPad 9 LCD Replacement Guide
Here are some tools you may need to help you complete the repair.
Please note: A discounted simple toolset with the tools you need is available in a pop-up when you add this product to cart
- #000 1.5mm Metal Phillips Screwdriver Tool (PH000)
- #00 Metal Phillips 2.0mm Screwdriver Tool (PH00)
- uFix iOpener Microwaveable Heated Bag Opening Tool
- CPB 320 Repair Heat Pad for mobile phones and tablets
- Large Blue Suction Cup Opening Tool
- iGadget Plastic Triangle Opening Picks (set of 5)
- iPlastix Flexible Opening Tool by Dottorpod
- 5x iGadget Plastic Flexible Opening Cards
- Nylon Antistatic Spudger Pry Tool
- iGadget Plastic Alcohol 200mL Bottle with Pump Top
- 2mm Tesa Tape 61395 Roll Double Sided Adhesive Tape (100m)
- iGadget Universal Magnetic Work Project Mat with Marker (30cm x 25cm)
Here are some helpful tips to assist you in completing a safe repair on your device. If you are unsure of something or have any questions, please feel free to contact us either by phone (0508 IGADGET) or by email
- Drain the battery below 25% and power the iPad off before you start.
- Warm the edges with the iOpener or heat pad in short passes, as too much heat can damage the battery.
- You're refitting the original glass, so go slowly, as forcing it can crack it.
- Keep opening picks only 1mm in along the bottom edge by the antennas and never over the front camera. Use the iPlastix by the antennas.
- Disconnect the battery before you unplug anything else: slide a plastic card under its spring contacts without force, as they bend easily. Keep metal tools away from it, and never bend, crush or puncture it.
- Always track your screws on a magnetic mat, so each goes back in the right place.
- Refit press connectors by pressing one side then the other until they click, never the middle.
- Test the picture and touch before you seal it, and leave the protective film on until the new LCD works. If it doesn't turn on or show a picture, force restart it by holding the top button and Home button until the Apple logo appears.
- Clean the old adhesive off with isopropyl alcohol and lay new 2mm Tesa tape round the frame before you stick the glass back down.
What’s In The Box
- 1x iPad 9 / 8 / 7 10.2-inch replacement LCD

In Stock