Apple Watch Series 3 42mm (GPS) Force Touch Gasket with Adhesive
0 Reviews IWA393-42MM/GPS |
In Stock
NZ$13.99
Apple Watch Series 3 42mm (GPS) Force Touch Gasket with Adhesive
0 Reviews
IWA393-42MM/GPS | In Stock
NZ$13.99
- Replacement force touch for 42mm Series 3 GPS Apple Watch
- Includes precut adhesive for adhering the screen to the chassis
- Compatible with Apple Watch Series 3 model; A1859
Product Details
Compatibility
What’s In The Box
ReviewsFrequently Bought Together
Product Details
When working on the inside of your 42mm Apple Watch Series 3 model, it is easy to cut the force touch sensor when attempting to remove the screen. Restore force touch functions while also adhering the screen to the chassis with this gasket, no need to cut and shape new adhesive to fit the frame, it is precut to size!
Installation adhesive for the two sides of the gasket is pre-attached.
Please Note
This Apple Watch force touch gasket is not compatible with the 42mm GPS+Cellular version or the 38mm versions of the Series 3 Apple Watch
Specifications
- Adhesive Type: Double-sided
- Gasket Size: 42mm
- Watch Type: GPS only
- Warranty: 12 Months
How do I find my Model number?
Apple Watch Series 3 GPS 42mm
Compatible Model Numbers
Apple Watch Series 3 GPS 42mmModel Number (A Number)
- A1859
Series 3 42mm GPS Model NumbersHow do I find my Model number?
Model Identifier
- Watch3,4
EMC Number
- EMC 3166
Device Number (M Number)
- MQL02
- MQL12
- MQL22
- MQL32
- MQL42
- MR362
More info Less info
Installation Help
Watch the video above or checkout the step-by-step guide below for assistance in completing this repair
iFixit Apple Watch Series 3 Force Touch Replacement Guide
Here is some tools you may need to help you complete the repair.
- #11 Point Knife Blades x5
- uFix iOpener Heat bag
- iFlex opening tool
- iGadget Y000 Triwing Tri-Point Screwdriver
- Fine Tipped Curved Tweezers
- Black Spudger
- iGadget 5x Plastic Opening cards
- Screw Mat
Here are some helpful tips to assist you in completing a safe repair on your device. If you are unsure of something or have any quesions, please feel free to contact us either by phone (0508 IGADGET) or by email
- Always track your screws to avoid putting back in the wrong place and damaging your device. You can draw a picture of your watch and tape the screws to the right places or use a screw mat
- Always power down your device prior to working on it
- Make sure you always unplug the battery before attemping any component removal
- Before removing your battery, discharge the battery to below 25%. A charged lithium-ion battery can catch fire or explode if punctured or damaged
- When attempting to remove the screen, be careful not to push the blade or iFlex tool in too far or too hard, doing so may cause damage to the internal parts. Only 3mm depth is required to cut the adhesive. Draw a mark on your tool to help with depth management.
- Make sure you align and place the gasket the right way up so it clips in correctly on the watch, take note of how the previous force touch was placed
- Make sure all residue is removed and cleaned prior to installing the new adhesive, if not done correctly the screen may seperate from the frame. We recommend cleaning the frame with isopropyl alchohol wipes
Caution
If the battery in your device is swollen or damaged during repair, take the proper precautions
What’s In The Box
- 1x Apple Watch Series 3 42mm GPS Force Touch Gasket and Adhesive
