iPhone 14 Battery Replacement | 3279mAh | Premium Zero-Cycle
iPhone 14 Battery Replacement | 3279mAh | Premium Zero-Cycle
In Stock
Regular price
NZ$27.99
Regular price
Sale price
NZ$27.99
Unit price
per
inc GST
iPhone 14 Battery Replacement | 3279mAh | Premium Zero-Cycle
iPhone 14 Battery Replacement | 3279mAh | Premium Zero-Cycle
In Stock
Regular price
NZ$27.99
Regular price
Sale price
NZ$27.99
Unit price
per
inc GST
DIY DIFFICULTY
ModerateAbout 1 to 2 hours
Held in by two stretch-release pull-tab strips under the back glass. The back glass comes off first; the screen stays on.
- Premium 3279mAh zero-cycle battery with a Texas Instruments fuel gauge chip, battery adhesive included
- Replaces a battery that drains fast, won't hold a charge, shuts down early or shows a Service message
- Compatible with iPhone 14 models: A2649, A2881, A2882, A2883 and A2884
Frequently Bought Together
Frequently Bought Together
Product Details
Is your iPhone 14 draining fast, shutting down early, not turning on or showing a Service message in Battery Health? A worn battery is usually the cause. This is a new 3279mAh replacement (battery model A2863).
Also available for the iPhone 14: Diagnostic Battery (no Unknown Part message)
- TEXAS INSTRUMENTS FUEL GAUGE CHIP - The same brand of chip Apple uses, reporting temperature, voltage and charge to your iPhone.
- NO SURPRISE SHUTDOWNS - Accurate readings help your iPhone charge safely, stop at full and show a true percentage, so no sudden drops or early shutdowns like low-grade chips cause.
- ZERO CYCLE CELL - A brand new cell, never used in a phone, so you start with its full life.
- FULL 3279mAh CAPACITY - Rated at 3279mAh, the same as the battery Apple fitted to the iPhone 14.
- BATTERY HEALTH SHOWS - On iOS 18.1 or later, Settings shows the new battery's Battery Health and maximum capacity, so you can keep an eye on it.
- SENT FROM NZ STOCK - Shipped from our New Zealand stock, so there's no waiting weeks for a part to arrive from overseas.
Part Includes:
- iPhone 14 Replacement Battery
- Battery Adhesive Strips
- 12 Month Warranty
Please Note
Does NOT fit the iPhone 14 Plus, 14 Pro or 13. Check in Settings, General, About for your model.
Please Note
New stretch-release adhesive strips with pull tabs come in the box, so the battery sits secure and can come out cleanly next time.
Please Note
Aftermarket battery, not an official Apple part. iOS shows "Unable to verify this iPhone has a genuine Apple battery" and lists it as an Unknown Part. The battery works normally.
Specifications
- Compatible Part Numbers: A2863, 661-30373
- Voltage: 3.87V
- Watt Hours: 12.69Whr
- Capacity: 3279mAh
- Chipset: Texas Instruments
- Battery Type: Lithium-ion polymer
- Condition: Brand new cell
- Pairing: iOS shows an Unknown Part message in Settings, and the battery works normally.
- Warranty: 12 Months
How do I find my Model number?
iPhone 14
Compatible Model Numbers
iPhone 14Model Number (A Number)
- A2649
- A2881
- A2882
- A2883
- A2884
iPhone 14 Model Numbers
Model Identifier
- iPhone14,7
EMC Number
- EMC 8138
- EMC 8142
- EMC 8143
- EMC 8144
Device Number (M Number)
- MPVH3
- MPWM3
- MPXL3
- MPUX3
- MPW83
- MPX73
- MPUA3
- MPVV3
- MPWU3
- MPUN3
- MPW23
- MPX13
- MPV73
- MPWF3
- MPXE3
- MPVN3
- MPWP3
- MPXN3
- MPV03
- MPWA3
- MPX93
- MPUF3
- MPVX3
- MPWW3
- MPUR3
- MPW43
- MPX33
- MPVA3
- MPWH3
- MPXG3
- MR3J3
- MR3K3
- MR3P3
- MR3X3
- MR3Y3
- MR513
More info Less info
Installation Help
Check out the video above or the step by step guide below for assistance with this repair
iFixit iPhone 14 Battery Replacement Guide
Remember
After completing your repair, calibrate your newly installed battery by charging it to 100% and then charging for a further two hours. Use your iPhone until it shuts off due to low battery, and finally, charge it uninterrupted to 100% again
Here are some tools you may need to help you complete the repair.
Please note: A discounted simple toolset with the tools you need is available in a pop-up when you add this product to cart
- P2 Metal Pentalobe 0.8mm Screwdriver Tool
- Y000 Metal Triwing Tri-Point 0.6mm Screwdriver Tool
- Large Blue Suction Cup Opening Tool
- Mechanic AK-15 King ESD Anti-Static Stainless Steel Red Curved Tweezers
- iGadget Plastic Triangle Opening Picks (set of 5)
- 5x iGadget Plastic Flexible Opening Cards
- Nylon Antistatic Spudger Pry Tool
- Or get the P2 and Y000 screwdrivers, suction cup, tweezers, opening pick, opening card and spudger together in our 8 Piece iPhone Repair Toolkit
- uFix iOpener Microwaveable Heated Bag Opening Tool
- iGadget Plastic Alcohol 200mL Bottle with Pump Top
- iPhone 14/iPhone 16e Water Resistant Rear Back Glass Gasket Adhesive Glue
- iGadget Universal Magnetic Work Project Mat with Marker (30cm x 25cm)
Here are some helpful tips to assist you in completing a safe repair on your device. If you are unsure of something or have any questions, please feel free to contact us either by phone (0508 IGADGET) or by email
- Drain the battery below 25% and power the phone off before you start. A charged lithium-ion battery can catch fire if it's punctured or damaged
- Remove the pentalobe screws by the charging port. Warm the back glass edges with the iOpener in short bursts to protect the battery. Lift the bottom edge of the back glass with a suction cup and work an opening pick around, no more than 3mm deep. Keep it out of the right edge by the volume up button, where a cable runs, and go gently at the top left by the cameras
- Open the back glass from the left side like the back cover of a book, and support it so you don't strain the short charging coil cable
- Track your screws on a magnetic mat or tape them to a drawing of your phone. They're different lengths, and a long screw in a short hole can damage the logic board
- Always unplug the battery before you remove any other parts. Keep metal tools away from the battery, and never bend, crush or puncture it.
- Remove the battery connector cover (Y000) and unplug the battery, then the charging coil connector cover (Y000). Unplug the coil cable and lift the back glass off. The battery is now in front of you, and the screen stays on
- Two stretch-release strips hold the battery, both reached from the top edge. Pull each tab slowly towards the top of the phone, low and flat; winding it around your tweezers. Hold the battery as you pull. If a strip breaks, drip isopropyl alcohol under that edge, wait a minute, then lift the battery slowly with a plastic card
- Clean off any old adhesive and fit the new adhesive strips from the box. Press the battery connector down until it clicks, then check the phone powers on and charges before you seal it up
- Clean off the old adhesive with isopropyl alcohol and fit a new back glass adhesive before you close it up
- If the new battery drains fast or shuts off, reseat the battery connector, check it for foam or debris and make sure the flex isn't strained, then do a force restart
Caution
If the new battery or the battery in your device is swollen or damaged during repair, take the proper precautions
Note
You cannot dispose of old batteries in your general waste. Find recycling e-waste centres online or take to your local refuse station.
What's In The Box
- 1x iPhone 14 Replacement Battery
- 1x Replacement Battery Adhesive
