
Things you may need for this repair


Product Details
Lines, dead pixels, colour bleeding or a black screen on your iPad 10 or iPad 11? On these iPads the LCD is a separate panel under the touch glass, so if touch still works you only need a new LCD.
Also for the iPad 10 / 11: Glass and Digitiser (cracked glass or touch faults)
- SHARP 10.9-INCH PICTURE - 2360 x 1640 resolution at 264 ppi, the same as the display these iPads came with.
- LCD ONLY, LOWER COST - If your glass is fine and only the picture is damaged, you replace just the LCD and keep your glass.
- SENT FROM NZ STOCK - Shipped from our New Zealand stock, so there's no waiting weeks for a part to arrive from overseas.
Part Includes:
- LCD display panel
- 12 Month Warranty
Please Note
Does NOT fit the iPad 9 / 8 / 7, iPad Air (4th gen and newer) or iPad Pro 11-inch, which use different screens. Check in Settings, General, About for your model.
Please Note
LCD only. The touch glass is a separate part, so if touch has also stopped working you'll need the iPad 10 / 11 glass and digitiser as well.
Specifications
- Display Size: 10.9-inch (diagonal), sold as 11-inch on the iPad 11
- Resolution: 2360 x 1640 pixels (264 ppi)
- Refresh Rate: 60Hz
- Type: LCD panel only (no glass or digitiser)
- Condition: Brand new
- Pairing: Not needed. This iPad doesn't check its screen, so no Unknown Part message.
- Warranty: 12 Months
Compatible Model Numbers
iPad 11 WiFiModel Number (A Number)
- A3354
iPad 11 Model NumbersHow do I find my Model number?
Model Identifier
- iPad15,7
EMC Number
- EMC 8805
Device Number (M Number)
- MD3Y4
- MD4G4
- MD4Q4
- MD4D4
- MD4J4
- MD5A4
- MD4A4
- MD4H4
- MD4Y4
- MD4E4
- MD4P4
- MD5C4
iPad 11 WiFi + CellularModel Number (A Number)
- A3355
- A3356
iPad 11 WiFi + Cellular Model NumbersHow do I find my Model number?
Model Identifier
- iPad15,8
EMC Number
- EMC 8806
Device Number (M Number)
- MD7F4
- MD7K4
- MD7P4
- MD7H4
- MD7M4
- MD7R4
- MD7G4
- MD7L4
- MD7Q4
- MD7J4
- MD7N4
- MD7U4
- MD7Y4
- MD8D4
- MD7W4
- MD8A4
- MD8E4
- MDAJ4
iPad 10 WiFiModel Number (A Number)
- A2696
iPad 10 WiFi Model NumbersHow do I find my Model number?
Model Identifier
- iPad13,18
EMC Number
- EMC 8137
Device Number (M Number)
- MPQ03
- MPQ83
- MPQ23
- MPQA3
- MPQ13
- MPQ93
- MPQ33
iPad 10 WiFi + CellularModel Number (A Number)
- A2757
- A2777
- A3162
iPad 10 WiFi + Cellular Model NumbersHow do I find my Model number?
Model Identifier
- iPad13,19
EMC Number
- EMC 2499
- EMC 2578
Device Number (M Number)
- MQ6J3
- MQ6T3
- MQ6L3
- MQ6V3
- MQ6K3
- MQ6U3
- MQ6M3
- MQ6W3
- MQ6X3
- MQ783
- MQ6Y3
- MQ703
- MQ773
- MQ713
- MQ793
Installation Help
Check out the video above or the step by step guide below for assistance with this repair
The guide replaces the LCD and fits a new glass in the same job, so it covers both parts. The iPad 11 comes apart the same way.
iFixit iPad 10 Display Replacement Guide
Here are some tools you may need to help you complete the repair.
Please note: A discounted simple toolset with the tools you need is available in a pop-up when you add this product to cart
- #00 Metal Phillips 2.0mm Screwdriver Tool (PH00)
- uFix iOpener Microwaveable Heated Bag Opening Tool
- CPB 320 Repair Heat Pad for mobile phones and tablets
- Large Blue Suction Cup Opening Tool
- iGadget Plastic Triangle Opening Picks (set of 5)
- 5x iGadget Plastic Flexible Opening Cards
- Nylon Antistatic Spudger Pry Tool
- Mechanic AK-15 King ESD Anti-Static Stainless Steel Red Curved Tweezers
- iGadget Plastic Alcohol 200mL Bottle with Pump Top
- 2mm Tesa Tape 61395 Roll Double Sided Adhesive Tape (100m)
- iGadget Universal Magnetic Work Project Mat with Marker (30cm x 25cm)
Here are some helpful tips to assist you in completing a safe repair on your device. If you are unsure of something or have any questions, please feel free to contact us either by phone (0508 IGADGET) or by email
- The battery stays connected for this repair, so drain it fully before you start. Keep metal tools away from the battery and board, and never bend, crush or puncture the battery.
- Power the iPad off before you start, and tape over cracked glass so it lifts in one piece.
- Warm the edges with the iOpener or heat pad in short passes. Go no deeper than 2mm with opening picks along the top edge, where the light sensor and front camera sit.
- The glass stays connected by three cables, so lift it carefully.
- The LCD screws are Torx Plus 2IP, so you'll need a Torx Plus 2IP screwdriver. Always track your screws on a magnetic mat, as they are different lengths.
- The LCD cable is lightly stuck to the board, so peel it up slowly.
- Refit press connectors by pressing one side then the other until they click, never the middle.
- Test touch and the picture before you seal it, and leave the protective film on until the new part works. If it doesn't turn on or show a picture, press and release volume up, then volume down, then hold the top button until the Apple logo appears.
- Keep isopropyl alcohol off the light sensor and camera at the top edge when you clean off the old adhesive. Lay new 2mm Tesa tape round the frame before you stick the glass back down, and hold it while the adhesive sets.
What’s In The Box
- 1x iPad 10 / 11 10.9-inch replacement LCD

In Stock