
Product Details
Cracked screen, black display, lines or flickering on your MacBook Air M4 A3240? Replace the damaged LCD with this complete display assembly for the 13.6" M4 MacBook Air (2025).
It is a 13.6" 2560 x 1664 LCD screen, supplied as a complete lid with the 12MP Center Stage camera, hinges and display cables already fitted. The display is held in with screws at the hinges, so there is no glass or panel to separate.
Part Includes:
- 2560 x 1664 13.6" LCD Screen
- Aluminium lid (back housing) and bezel
- Hinges
- 12MP Center Stage Camera
- Camera connection cable
- LCD display cable
- 12 Month Warranty
Please Note
Does NOT fit the M3 A3113, M5 A3449, M2 A2681, M1 A2337 or the 15" MacBook Air. Check the A-number on the bottom case for your model.
Please Note
The whole lid is replaced, so pick Midnight (the near-black colour) or Silver to match your MacBook.
Please Note
Not an official Apple part. The screen supports True Tone, but Apple switches it off after a screen is replaced. Manual and auto-brightness work as normal.
Specifications
- Part Type: Complete Display Assembly (Lid)
- Colours: Midnight or Silver
- Screen Size: 13.6"
- Screen Type: LCD (LED-backlit IPS)
- Resolution: 2560 x 1664
- Pixel Density: 224 ppi
- LCD Panel: S+ grade, assembled by a specialist third-party factory
- Lid: OEM aluminium lid with original hinges
- Camera: Original 12MP Center Stage camera
- Springs, metal strip and rubber seal: Original
- Adhesive: Strong 3M
- True Tone: Supported by the screen, but Apple turns it off after a screen replacement
- Connections: LCD and front camera
- Warranty: 12 Months
Compatible Model Numbers
MacBook Air M4 13" 2025Model Number (A Number)
- A3240
EMC Number
- EMC 8781
MacBook Air M4 13" 2025 How do I find my Model number?
Model Identifier
- Mac16,12
Device Number (M Number)
- MW123
- MW133
- MC6C4
- MW0W3
- MW0X3
- MC654
- MW0Y3
- MW103
- MC6A4
- MC6T4
- MC6U4
- MC6V4
Installation Help
Check out the video above for assistance with this repair
Here are some tools you may need to help you complete the repair.
- P2 Metal Pentalobe 0.8mm Screwdriver Tool
- P5 Metal Pentalobe 1.2mm Screwdriver Tool
- T3 Metal Torx Screwdriver Tool
- T4 Metal Torx Screwdriver Tool
- T5 Metal Torx Screwdriver Tool
- T8 Torx Security Screwdriver Tool
- Or get the P2, P5, T3, T5 and T8 together in our 10 Piece MacBook Repair Toolkit
- Large Blue Suction Cup Opening Tool
- iGadget Plastic Triangle Opening Picks (set of 5)
- Nylon Antistatic Spudger Pry Tool
- Mechanic AK-15 King ESD Anti-Static Stainless Steel Red Curved Tweezers
- iGadget Universal Magnetic Work Project Mat with Marker (30cm x 25cm)
Here are some helpful tips to assist you in completing a safe repair on your device. If you are unsure of something or have any questions, please feel free to contact us either by phone (0508 IGADGET) or by email
- Drain the battery below 25% before you start on this repair
- Turn off Auto Boot so the MacBook won't power on mid-repair (iFixit guide). On macOS Sequoia 15 or later, enter sudo nvram BootPreference=%00 in Terminal, and sudo nvram -d BootPreference afterwards (Apple guide). Then power down
- Always track your screws to avoid putting them back in the wrong place and damaging your device. Draw a picture of your laptop and tape the screws to the right places, or use a magnetic work mat
- Apple uses Torx Plus screws inside. Our same-size Torx drivers turn them, but they sit with a little play, so press down firmly and turn gently
- The bottom case is held by P5 screws, clips and sliding tabs on the back edge. Lift a front corner with the suction cup, release the clips with a pick, then pull the case forward to free the tabs
- Always unplug the battery before you remove any other parts. Keep metal tools away from the battery, and never bend, crush or puncture it.
- The speakers, hinge covers and display cable cover come out to reach the display cables and hinge screws. Lift the display connectors straight up with the spudger and unplug the lid-angle sensor cable
- Support the display at 90 degrees while you remove and refit the hinge screws, and check the lid sits flush before tightening them fully
- Route the display, camera and lid-angle sensor cables the same way as the old ones so they don't get pinched by the hinge. The M4 routing differs from the M2, so don't follow an M2 guide
- Test the screen, camera and Wi-Fi before you refit the bottom case, and leave the protective film and stickers on until the new screen is working properly.
What’s In The Box
- 1x A3240 MacBook Air M4 13" Complete Display Assembly 2025 (Midnight or Silver as selected)
