
Product Details

Cracked glass, a black or flickering display, green or white lines, or a touch screen that has stopped responding on your iPhone 12 or iPhone 12 Pro all mean the screen needs replacing. This iPhone 12 / 12 Pro screen replacement is a complete diagnostic Soft OLED screen assembly - display, touch and front glass in one part - so it fixes both the picture and the touch in a single swap. The iPhone 12 and iPhone 12 Pro use the same screen, so this one part fits both. Looking for an iPhone 12 LCD? The iPhone 12 actually uses an OLED display, and this replacement is OLED to match.
Also available for the iPhone 12 / 12 Pro: Soft OLED (lower price) · In-Cell LCD (budget option)
This diagnostic screen pairs a REPART soft OLED panel with the original Apple display chip, moved over from a genuine iPhone 12 / 12 Pro screen. Because the chip is Apple's, there's no "Unknown Part" warning and no chip soldering for you to do. The panel is 6.1 inches, 2532 x 1170 at 460 ppi.
- NO UNKNOWN PART MESSAGE - The original Apple display chip is already fitted, so iOS shows Genuine Used instead of an Unknown Part warning, with no soldering or chip transfer.
- TRUE OLED - Real blacks and rich, bright colour from the same display type your iPhone came with. OLED also uses less battery than an LCD.
- SHARP SOFT OLED - 2532 x 1170 at 460 ppi, the same resolution as the original screen.
- TRUE TONE - Works with iOS 18 or later, no transfer machine needed.
- PRECISE FIT - Brackets come pre-installed and the cutouts match the original screen, so every hole lines up and the frame sits flush.
- QUALITY GLASS - Hard-wearing glass with an oleophobic (anti-fingerprint) coating that stands up to daily use.
Part Includes:
- iPhone 12 / 12 Pro Diagnostic Flexible Soft OLED Screen Assembly (original Apple chip fitted)
- iPhone 12 / 12 Pro Screen Gasket Adhesive
- 12 Month Warranty
Please Note
Does NOT fit iPhone 12 Pro Max, 12 mini, 13 or 13 Pro. Check in Settings, General, About for your model.
Please Note
Important: run Repair Assistant (Settings > General > About) with the front sensor flex unplugged first. Once paired, power down and plug the sensors in.
Please Note
True Tone works on iOS 18 and later. Don't write True Tone data to this screen with a programmer, as it may cause issues.
Please Note
Aftermarket soft OLED panel with the original Apple chip moved over, so it shows as Genuine Used instead of an Unknown Part warning. Not an official Apple product.
Specifications
- Screen Type: AMOLED (Diagnostic Flexible Soft OLED)
- Display Size: 6.1"
- Refresh Rate: 60Hz
- Polariser Viewing Angle: 360 degrees
- Resolution: 2532 x 1170 pixels
- Pixel Density: 460 ppi
- True Tone Capable: Yes (iOS 18 or later)
- Display Chip: original Apple chip pre-fitted - no Unknown Part warning, no IC transfer needed
- Colour Temp: 6500-7500K
- Colour Gamut Value: 100%
- Glass Rating: 9H
- Earpiece Speaker and Front Sensors: Not included - transfer from your old screen
- Pairing: Pairs with Repair Assistant and shows as a Used genuine Apple part.
- Warranty: 12 Months
Compatible Model Numbers
iPhone 12 ProModel Number (A Number)
- A2341
- A2406
- A2407
- A2408
iPhone 12 Pro Model Numbers
Model Identifier
- iPhone13,3
EMC Number
- EMC 3545
- EMC 3546
- EMC 3547
Device Number (M Number)
- MGJQ3
- MGJV3
- MGK03
- MGJM3
- MGJR3
- MGJW3
- MGJN3
- MGJT3
- MGJX3
- MGJP3
- MGJU3
- MGJY3
- MGKY3
- MGL43
- MGL83
- MGKV3
- MGL03
- MGL53
- MGKW3
- MGL23
- MGL63
- MGKX3
- MGL33
- MGL73
- MGKK3
- MGKP3
- MGKU3
- MGKG3
- MGKL3
- MGKQ3
- MGKH3
- MGKM3
- MGKR3
- MGKJ3
- MGKN3
- MGKT3
- MGK43
- MGK93
- MGKF3
- MGK13
- MGK53
- MGKA3
- MGK23
- MGK63
- MGKC3
- MGK33
- MGK73
- MGKE3
- MGLR3
- MGLW3
- MGM43
- MGLN3
- MGLT3
- MGLX3
- MGLP3
- MGLU3
- MGLY3
- MGLQ3
- MGLV3
- MGM23
- MGM53
- MGM93
- MGMF3
- MGM63
- MGMA3
- MGMG3
- MGM73
- MGMC3
- MGMH3
- MGM83
- MGMD3
- MGMJ3
- MGMN3
- MGMT3
- MGMX3
- MGMK3
- MGMP3
- MGMU3
- MGML3
- MGMQ3
- MGMV3
- MGMM3
- MGMR3
- MGMW3
- MGL93
- MGLE3
- MGLJ3
- MGLA3
- MGLF3
- MGLK3
- MGLC3
- MGLG3
- MGLL3
- MGLD3
- MGLH3
- MGLM3
iPhone 12Model Number (A Number)
- A2172
- A2402
- A2403
- A2404
iPhone 12 Model Numbers
Model Identifier
- iPhone13,2
EMC Number
- EMC 3542
- EMC 3543
- EMC 3544
Device Number (M Number)
- MGEK3
- MGEV3
- MGF23
- MGEF3
- MGER3
- MGEX3
- MGEG3
- MGET3
- MGF03
- MGEQ3
- MGEW3
- MGF33
- MGEH3
- MGEU3
- MGF13
- MJMX3
- MJMY3
- MJN03
- MGG83
- MGGE3
- MGGK3
- MGG53
- MGGA3
- MGGG3
- MGG63
- MGGC3
- MGGH3
- MGG93
- MGGF3
- MGGL3
- MGG73
- MGGD3
- MGGJ3
- MJN73
- MJN83
- MJN93
- MGFP3
- MGFX3
- MGG33
- MGFL3
- MGFR3
- MGG03
- MGFM3
- MGFT3
- MGG13
- MGFQ3
- MGFY3
- MGG43
- MGFN3
- MGFW3
- MGG23
- MJN43
- MJN53
- MJN63
- MGF73
- MGFD3
- MGFJ3
- MGF43
- MGF93
- MGFF3
- MGF53
- MGFA3
- MGFG3
- MGF83
- MGFE3
- MGFK3
- MGF63
- MGFC3
- MGFH3
- MJN13
- MJN23
- MJN33
- MGH93
- MGHF3
- MGHL3
- MGH63
- MGHC3
- MGHH3
- MGH73
- MGHD3
- MGHJ3
- MGHA3
- MGHG3
- MGHM3
- MGH83
- MGHE3
- MGHK3
- MJNE3
- MJNF3
- MJNG3
- MGHR3
- MGHX3
- MGJ33
- MGHN3
- MGHU3
- MGJ03
- MGHP3
- MGHV3
- MGJ13
- MGHT3
- MGHY3
- MGJ43
- MGHQ3
- MGHW3
- MGJ23
- MJNH3
- MJNJ3
- MJNK3
- MGJ83
- MGJE3
- MGJK3
- MGJ53
- MGJA3
- MGJG3
- MGJ63
- MGJC3
- MGJH3
- MGJ93
- MGJF3
- MGJL3
- MGJ73
- MGJD3
- MGJJ3
- MJNM3
- MJNP3
- MJNQ3
- MGGQ3
- MGGX3
- MGH43
- MGGM3
- MGGU3
- MGH13
- MGGN3
- MGGV3
- MGH23
- MGGT3
- MGGY3
- MGH53
- MGGP3
- MGGW3
- MGH33
- MJNA3
- MJNC3
- MJND3
Installation Help
Check out the video above or the step by step guide below for assistance with this repair
iFixit iPhone 12 Pro Screen Replacement Guide
iFixit iPhone 12 Screen Replacement Guide
Here are some tools you may need to help you complete the repair.
Please note: A discounted simple toolset with the tools you need is available in a pop-up when you add this product to cart
- P2 Metal Pentalobe 0.8mm Screwdriver Tool
- Y000 Metal Triwing Tri-Point 0.6mm Screwdriver Tool
- #00 Metal Phillips 2.0mm Screwdriver Tool (PH00)
- Large Blue Suction Cup Opening Tool
- Mechanic AK-15 King ESD Anti-Static Stainless Steel Red Curved Tweezers
- iGadget Plastic Triangle Opening Picks (set of 5)
- 5x iGadget Plastic Flexible Opening Cards
- Nylon Antistatic Spudger Pry Tool
- Or get the P2 and Y000 screwdrivers, suction cup, tweezers, opening pick, opening card and spudger together in our 8 Piece iPhone Repair Toolkit
- iSclack Evo (Gen 3) Suction Cup Opening Tool for phones and tablets by Dottorpod
- uFix iOpener Microwaveable Heated Bag Opening Tool
- iHold Evo Screen Holding Opening Tool for iPads and iPhones with USB-C Adapter by Dottorpod
- 1mm Tesa Tape 61395 Roll Double Sided Adhesive Tape (50m)
- iGadget Plastic Alcohol 200mL Bottle with Pump Top
- iGadget Universal Magnetic Work Project Mat with Marker (30cm x 25cm)
Here are some helpful tips to assist you in completing a safe repair on your device. If you are unsure of something or have any questions, please feel free to contact us either by phone (0508 IGADGET) or by email
- Drain the battery below 25% before you start on this repair
- Always power down your device prior to working on it
- Track your screws on a screw mat or tape them to a drawing of your phone. A long screw in a short hole can damage the logic board
- Heat the bottom edge to soften the adhesive before lifting the screen
- Insert picks under the plastic bezel, never at the seam with the display. The screen opens from the right like a book, as the cables are on the left. Go no deeper than 3mm, or 2mm along the left edge
- Always unplug the battery before you remove any other parts. Keep metal tools away from the battery, and never bend, crush or puncture it.
- Transfer the earpiece speaker and front sensor assembly from your old screen. It is held by two Phillips screws and two Y000 screws of different lengths. Warm the top edge and lift each sensor gently with a spudger. A broken sensor cable loses Face ID
- For a clean pairing, run Repair Assistant (Settings > General > About > Parts and Service History) with the front sensor flex unplugged. Once the screen is paired, power down and plug the sensors in
- Test touch, display, earpiece, proximity (screen turns off during a call) and Face ID before sealing the phone, and don't peel off the protective film or any stickers until it's all working
- Clean off all the old adhesive with isopropyl alcohol and fit the new screen adhesive supplied in the box to keep dust and moisture out
- Once the repair is finished, turn True Tone on in Settings > Display & Brightness (iOS 18 or later). Don't write True Tone data to this screen with a programmer, as it may cause issues
What’s In The Box
- 1x iPhone 12 / 12 Pro Diagnostic Flexible Soft OLED Screen Replacement
- 1x iPhone 12 / 12 Pro Screen Gasket Adhesive
