
Often bought with this part

Product Details
Cracked screen on your iPad Pro 12.9" 5th / 6th Gen, touch not responding or no picture? On these iPads the glass, touch digitiser and display are one laminated assembly, so this complete screen is the part you need. It's a brand new aftermarket screen, not an official Apple part.
- COMPLETE SCREEN ASSEMBLY - Glass, touch digitiser and display laminated together, ready to fit, so there's no separating layers.
- SHARP 12.9-INCH PICTURE - 2732 x 2048 resolution at 264 ppi, the same as the display your iPad came with.
- BUILT TO THE ORIGINAL SPEC - Assembled with materials made to the same quality and specifications as the original screen.
- MINI-LED BACKLIGHT - Mini-LED backlit, the same type of backlight as the screen your iPad came with.
- 120HZ REFRESH RATE - Smooth scrolling and Apple Pencil drawing at up to 120Hz, like the original.
- TESA TAPE PRE-FITTED - Tesa adhesive comes fitted round the edge, so there's no cutting and laying adhesive strips.
- SENT FROM NZ STOCK - Shipped from our New Zealand stock, so there's no waiting weeks for a part to arrive from overseas.
Part Includes:
- 12.9-inch mini-LED and touch screen assembly
- Pre-fitted Tesa adhesive
- 12 Month Warranty
Please Note
Fits only the iPad Pro 12.9" 5th and 6th Gen. The 3rd and 4th Gen look the same but take a different screen, and the 13-inch M4 iPad Pro does not fit. Check the A number on the back of your iPad.
Please Note
On the iPad Pro the glass, touch digitiser and display are laminated together as one part, so a cracked screen is fixed by replacing the whole assembly. Glass on its own can't be separated and refitted at home.
Please Note
The top sensor assembly (two light sensors, the proximity sensor and a microphone) is not included. Move it across from your old screen.
Specifications
- Display Size: 12.9-inch (diagonal)
- Resolution: 2732 x 2048 pixels (264 ppi)
- Display Type: Mini-LED backlit LCD
- Refresh Rate: 120Hz
- Type: mini-LED and touch digitiser assembly, glass laminated
- Adhesive: Tesa tape pre-fitted
- Display Cables: Not included, move across from your old screen
- Top Sensor Assembly: Not included, move across from your old screen
- Colour: Black
- Condition: Brand new aftermarket
- Pairing: Not needed. This iPad doesn't check its screen, so no Unknown Part message.
- Warranty: 12 Months
Compatible Model Numbers
Model Number (A Number)
- A2436
iPad Pro 12.9" 6 WiFi Model NumbersHow do I find my Model number?
Model Identifier
- iPad14,5
EMC Number
- EMC 8169
Device Number (M Number)
- MNXQ3
- MNXT3
- MNXV3
- MNXX3
- MNY03
- MNXP3
- MNXR3
- MNXU3
- MNXW3
- MNXY3
Model Number (A Number)
- A2764
- A2437
- A2766
iPad Pro 12.9" 6 WiFi + Cellular Model NumbersHow do I find my Model number?
Model Identifier
- iPad14,6
EMC Number
- EMC 8176
- EMC 8177
Device Number (M Number)
- MP5Y3
- MP613
- MP653
- MP673
- MP5X3
- MP603
- MP623
- MP643
- MP663
- MP1Y3
- MP213
- MP233
- MP253
- MP273
- MP243
- MP263
- MP1X3
- MP203
- MP223
- MP293
- MP2J3
- MP2C3
- MP2E3
- MP2G3
- MP2D3
- MP2F3
- MP2H3
- MP283
- MP2A3
Model Number (A Number)
- A2378
iPad Pro 12.9" 5 WiFi Model NumbersHow do I find my Model number?
Model Identifier
- iPad13,8
EMC Number
- EMC 3689
Device Number (M Number)
- MHNG3
- MHNJ3
- MHNL3
- MHNN3
- MHNQ3
- MHNF3
- MHNH3
- MHNK3
- MHNM3
- MHNP3
Model Number (A Number)
- A2379
- A2461
- A2462
iPad Pro 12.9" 5 WiFi + Cellular Model NumbersHow do I find my Model number?
Model Identifier
- iPad13,9
- iPad13,10
- iPad13,11
EMC Number
- EMC 3686
- EMC 3687
- EMC 3688
Device Number (M Number)
- MHNT3
- MHNX3
- MHP03
- MHP23
- MHP53
- MHNR3
- MHNW3
- MHNY3
- MHP13
- MHP43
- MHR53
- MHR73
- MHR93
- MHRC3
- MHRE3
- MHR43
- MHR63
- MHR83
- MHRA3
- MHRD3
Installation Help
Check out the video above or the step by step guide below for assistance with this repair
iFixit iPad Pro 12.9" 5th Gen Screen Replacement Guide
iFixit iPad Pro 12.9" 6th Gen Screen Replacement Guide
Here are some tools you may need to help you complete the repair.
Please note: A discounted simple toolset with the tools you need is available in a pop-up when you add this product to cart
- #00 Metal Phillips 2.0mm Screwdriver Tool (PH00)
- uFix iOpener Microwaveable Heated Bag Opening Tool
- CPB 320 Repair Heat Pad for mobile phones and tablets
- Large Blue Suction Cup Opening Tool
- iGadget Plastic Triangle Opening Picks (set of 5)
- 5x iGadget Plastic Flexible Opening Cards
- Nylon Antistatic Spudger Pry Tool
- Mechanic AK-15 King ESD Anti-Static Stainless Steel Red Curved Tweezers
- iGadget Plastic Alcohol 200mL Bottle with Pump Top
- B7000 Multipurpose Liquid Repair Glue - 15ml
- iGadget Universal Magnetic Work Project Mat with Marker (30cm x 25cm)
Here are some helpful tips to assist you in completing a safe repair on your device. If you are unsure of something or have any questions, please feel free to contact us either by phone (0508 IGADGET) or by email
- Drain the battery below 25% before you start on this repair
- Power the iPad off before you start, and tape over cracked glass so it lifts in one piece.
- The battery stays connected for this repair. Keep metal tools away from the battery and board, and never bend, crush or puncture the battery.
- Warm the edges with the iOpener or heat pad in short passes, as too much heat can damage the battery.
- Keep opening picks shallow, as the display cables, sensors and antennas sit just inside the edge.
- Always track your screws on a magnetic mat, as they are different lengths.
- Refit press connectors by pressing one side then the other until they click, never the middle.
- The display cables are not fitted to the new screen, so move them across from your old screen and keep the connectors clean.
- Move the top sensor assembly (two light sensors, the proximity sensor and the microphone) to the new screen. Warm it first and lift each part slowly with tweezers, using a little B7000 if its adhesive has gone.
- Test touch, the picture, Face ID and auto-brightness before you seal it, and leave the protective film on until the new screen works.
- Clean the old adhesive off the frame with isopropyl alcohol before you stick the screen down, and hold it while the adhesive sets.
What’s In The Box
- 1x iPad Pro 12.9" 5th / 6th Gen replacement mini-LED and digitiser assembly, Tesa adhesive pre-fitted

In Stock