
Product Details
Cracked screen on your iPad Pro 11" 3rd / 4th Gen, touch not responding or no picture? On these iPads the glass, touch digitiser and display are one laminated assembly, so this complete screen is the part you need. It's a brand new aftermarket screen, not an official Apple part.
- COMPLETE SCREEN ASSEMBLY - Glass, touch digitiser and display laminated together, ready to fit, so there's no separating layers.
- SHARP 11-INCH PICTURE - 2388 x 1668 resolution at 264 ppi, the same as the display your iPad came with.
- BUILT TO THE ORIGINAL SPEC - Assembled with materials made to the same quality and specifications as the original screen.
- 120HZ REFRESH RATE - Smooth scrolling and Apple Pencil drawing at up to 120Hz, like the original.
- TESA TAPE PRE-FITTED - Tesa adhesive comes fitted round the edge, so there's no cutting and laying adhesive strips.
- SENT FROM NZ STOCK - Shipped from our New Zealand stock, so there's no waiting weeks for a part to arrive from overseas.
Part Includes:
- 11-inch LCD and touch screen assembly
- Pre-fitted Tesa adhesive
- 12 Month Warranty
Please Note
Fits only the iPad Pro 11" 3rd and 4th Gen. The 1st and 2nd Gen and the iPad Air 4 and 5 look the same but take different screens. Check the A number on the back of your iPad.
Please Note
On the iPad Pro the glass, touch digitiser and display are laminated together as one part, so a cracked screen is fixed by replacing the whole assembly. Glass on its own can't be separated and refitted at home.
Please Note
The sensor strip at the top of your old screen is paired to Face ID. Move it across to the new screen, or Face ID will stop working.
Specifications
- Display Size: 11-inch (diagonal)
- Resolution: 2388 x 1668 pixels (264 ppi)
- Display Type: LCD
- Refresh Rate: 120Hz
- Type: LCD and touch digitiser assembly, glass laminated
- Adhesive: Tesa tape pre-fitted
- Display Cables: Not included, move across from your old screen
- Front Sensors: Not included, move across from your old screen (Face ID sensor strip)
- Colour: Black
- Condition: Brand new aftermarket
- Pairing: Not needed. This iPad doesn't check its screen, so no Unknown Part message.
- Warranty: 12 Months
Compatible Model Numbers
Model Number (A Number)
- A2759
iPad Pro 11" WiFi Model Numbers
Model Identifier
- iPad14,3
EMC Number
- EMC 8166
Device Number (M Number)
- MNXE3
- MNXG3
- MNXJ3
- MNXL3
- MNXN3
- MNXD3
- MNXF3
- MNXH3
- MNXK3
- MNXM3
Model Number (A Number)
- A2435
- A2761
- A2762
iPad Pro 11" WiFi + Cellular Model Numbers
Model Identifier
- iPad14,4
EMC Number
- EMC 8167
- EMC 8168
Device Number (M Number)
- MP563
- MP583
- MP5D3
- MP5F3
- MP5H3
- MP553
- MP573
- MP593
- MP5E3
- MP5G3
- MNYD3
- MNYF3
- MNYH3
- MNYK3
- MNYM3
- MNYC3
- MNYE3
- MNYG3
- MNYJ3
- MNYL3
- MNYP3
- MNYR3
- MNYU3
- MNYW3
- MNYY3
- MNYN3
- MNYQ3
- MNYT3
- MNYV3
- MNYX3
Model Number (A Number)
- A2377
iPad Pro 11" WiFi Model Numbers
Model Identifier
- iPad13,4
EMC Number
- EMC 3681
Device Number (M Number)
- MHQT3
- MHQV3
- MHQX3
- MHR03
- MHR33
- MHQR3
- MHQU3
- MHQW3
- MHQY3
- MHR23
Model Number (A Number)
- A2301
- A2459
- A2460
iPad Pro 11" WiFi + Cellular Model NumbersHow do I find my Model number?
Model Identifier
- iPad13,5
- iPad13,6
- iPad13,7
EMC Number
- EMC 3682
- EMC 3683
- EMC 3684
Device Number (M Number)
- MHMU3
- MHMW3
- MHMY3
- MHN13
- MHN33
- MHMT3
- MHMV3
- MHMX3
- MHN03
- MHN23
- MHW63
- MHW83
- MHWA3
- MHWD3
- MHWF3
- MHW53
- MHW73
- MHW93
- MHWC3
- MHWE3
Installation Help
Check out the video above or the step by step guide below for assistance with this repair
iFixit iPad Pro 11" 3rd Gen Screen Replacement Guide
iFixit iPad Pro 11" 4th Gen Screen Replacement Guide
Here are some tools you may need to help you complete the repair.
Please note: A discounted simple toolset with the tools you need is available in a pop-up when you add this product to cart
- #00 Metal Phillips 2.0mm Screwdriver Tool (PH00)
- uFix iOpener Microwaveable Heated Bag Opening Tool
- CPB 320 Repair Heat Pad for mobile phones and tablets
- Large Blue Suction Cup Opening Tool
- iGadget Plastic Triangle Opening Picks (set of 5)
- 5x iGadget Plastic Flexible Opening Cards
- Nylon Antistatic Spudger Pry Tool
- Mechanic AK-15 King ESD Anti-Static Stainless Steel Red Curved Tweezers
- iGadget Plastic Alcohol 200mL Bottle with Pump Top
- iGadget Universal Magnetic Work Project Mat with Marker (30cm x 25cm)
Here are some helpful tips to assist you in completing a safe repair on your device. If you are unsure of something or have any questions, please feel free to contact us either by phone (0508 IGADGET) or by email
- Drain the battery below 25% before you start on this repair
- Power the iPad off before you start, and tape over cracked glass so it lifts in one piece.
- Warm the edges with the iOpener or heat pad in short passes, as too much heat can damage the battery.
- Keep opening picks shallow, as the display cables, sensors and antennas sit just inside the edge.
- Disconnect the battery once the screen is open by sliding a plastic card between the spring contacts and the battery pads, without force. Keep metal tools away from the battery, and never bend, crush or puncture it.
- Always track your screws on a magnetic mat, as they are different lengths.
- Refit press connectors by pressing one side then the other until they click, never the middle.
- Move the sensor strip at the top of the old screen to the new one, as it's paired to Face ID. Warm it first and lift it slowly with tweezers so the flex isn't damaged.
- The display cables are not fitted to the new screen, so move them across from your old screen and keep the connectors clean.
- Test touch, the picture, Face ID and auto-brightness before you seal it, and leave the protective film on until the new screen works.
- Clean the old adhesive off the frame with isopropyl alcohol before you stick the screen down, and hold it while the adhesive sets.
What’s In The Box
- 1x iPad Pro 11" 3rd / 4th Gen replacement LCD and digitiser assembly, Tesa adhesive pre-fitted
