
Often bought with this part

Product Details
Cracked screen on your iPad Air 3, touch not responding or no picture? On the iPad Air 3 the glass, touch digitiser and LCD are bonded together as one part, so a cracked screen is fixed by replacing the whole assembly. This is a brand new aftermarket screen, not an official Apple part.
Also for the iPad Air 3: Front Glass (for refurbishers with LCD separating gear)
- COMPLETE SCREEN ASSEMBLY - Glass, touch digitiser and LCD bonded together and ready to fit, so there's no separating layers.
- SHARP 10.5-INCH PICTURE - 2224 x 1668 resolution at 264 ppi, the same as the display your iPad came with.
- TESA TAPE PRE-FITTED - Tesa adhesive comes fitted round the edge, so there's no cutting and laying adhesive strips.
- SENT FROM NZ STOCK - Shipped from our New Zealand stock, so there's no waiting weeks for a part to arrive from overseas.
Part Includes:
- 10.5-inch LCD and touch digitiser assembly
- Pre-fitted Tesa adhesive
- 12 Month Warranty
Please Note
Does NOT fit the iPad Pro 10.5" (2017), which looks the same but takes a different screen. Check the A number on the back of your iPad.
Please Note
Home button not included. Move your own across to keep Touch ID, as a replacement home button can't use it.
Specifications
- Display Size: 10.5-inch (diagonal)
- Resolution: 2224 x 1668 pixels (264 ppi)
- Display Type: LCD
- Refresh Rate: 60Hz
- Type: LCD and touch digitiser assembly, glass laminated
- Adhesive: Tesa tape pre-fitted
- Home Button: Not included, your original moves across
- Colour: Black or White
- Condition: Brand new aftermarket
- Pairing: Not needed. This iPad doesn't check its screen, so no Unknown Part message.
- Warranty: 12 Months
Compatible Model Numbers
iPad Air 3 WiFiModel Number (A Number)
- A2152
iPad Air 3 WiFi Model NumbersHow do I find my Model number?
Model Identifier
- iPad11,3
EMC Number
- EMC 3315
Device Number (M Number)
- MUUJ2
- MUUK2
- MUUL2
- MUUQ2
- MUUR2
- MUUT2
iPad Air 3 WiFi + CellularModel Number (A Number)
- A2123
- A2153
- A2154
iPad Air 3 WiFi + Cellular Model NumbersHow do I find my Model number?
Model Identifier
- iPad11,4
EMC Number
- EMC 3316
Device Number (M Number)
- MV152
- MV162
- MV172
- MV1D2
- MV1F2
- MV1G2
Installation Help
Check out the video above or the step by step guide below for assistance with this repair
iFixit iPad Air 3 Screen Replacement Guide
Here are some tools you may need to help you complete the repair.
Please note: A discounted simple toolset with the tools you need is available in a pop-up when you add this product to cart
- #00 Metal Phillips 2.0mm Screwdriver Tool (PH00)
- uFix iOpener Microwaveable Heated Bag Opening Tool
- CPB 320 Repair Heat Pad for mobile phones and tablets
- Large Blue Suction Cup Opening Tool
- iGadget Plastic Triangle Opening Picks (set of 5)
- 5x iGadget Plastic Flexible Opening Cards
- Nylon Antistatic Spudger Pry Tool
- Mechanic AK-15 King ESD Anti-Static Stainless Steel Red Curved Tweezers
- iGadget Plastic Alcohol 200mL Bottle with Pump Top
- B7000 Multipurpose Liquid Repair Glue - 15ml
- iGadget Universal Magnetic Work Project Mat with Marker (30cm x 25cm)
Here are some helpful tips to assist you in completing a safe repair on your device. If you are unsure of something or have any questions, please feel free to contact us either by phone (0508 IGADGET) or by email
- Drain the battery below 25% before you start on this repair
- Power the iPad off before you start, and tape over cracked glass so it lifts in one piece.
- Warm the edges with the iOpener or heat pad in short passes, as too much heat can damage the battery.
- Only slip the tips of opening picks in at the top, where the front camera sits.
- Don't lift the screen more than about 70 degrees, as the cables are still connected.
- Disconnect the battery once the screen is open by sliding a plastic card under the battery contacts, without force. Keep metal tools away from the battery, and never bend, crush or puncture it.
- Always track your screws on a magnetic mat, as they are different lengths.
- Refit press connectors by pressing one side then the other until they click, never the middle.
- Move your own home button across to keep Touch ID. Its cable is very thin, so slide it out with tweezers slowly, and glue the bracket to the new screen with B7000.
- Test touch, the picture, the home button and Touch ID before you seal it, and leave the protective film on until the new screen works.
- Clean the old adhesive off the frame with isopropyl alcohol before you stick the screen down, and hold it while the adhesive sets.
What’s In The Box
- 1x iPad Air 3 replacement LCD and digitiser assembly, Tesa adhesive pre-fitted

In Stock