
Frequently Bought Together
Product Details

Cracked your Samsung A34 5G screen, or is the display black, showing lines, or no longer responding to touch? This is a premium OEM OLED and digitiser assembly for the Galaxy A34 5G (SM-A346B).
- FRAME PRE-INSTALLED, LESS RISK - The middle frame comes fitted, so there's no heating and prying a glued screen off your old frame, the step where most DIY screen repairs go wrong.
- OEM OLED PANEL - An OEM Samsung OLED panel with new front glass fitted, in the original 6.6" size and 1080 x 2340 resolution, so colours, contrast and deep blacks match the screen you had.
- FINGERPRINT READER WORKS - The in-display fingerprint reader works with this OLED panel just as it did with the original, so you keep fingerprint unlock.
- TOUGH, SMUDGE RESISTANT GLASS - 9H rated glass with an oleophobic coating, so it stands up to everyday scratches and wipes clean of fingerprints.
- PRECISE FIT - The cutouts, brackets and screw points line up with the original, so the screen sits flush and your phone closes up properly.
- SENT FROM NZ STOCK - Shipped from our New Zealand stock, so there's no waiting weeks for a part to arrive from overseas.
Part Includes:
- Samsung Galaxy A34 5G OEM OLED and touch digitiser
- Middle frame (pre-installed)
- 12 Month Warranty
Please Note
Does NOT fit the Galaxy A35, A54 or A24, which look similar. Check in Settings, About phone for your model.
Please Note
Your board, sub-board and battery move across to the new frame. The battery is not included.
Please Note
OEM OLED panel with replacement glass fitted, not a new Samsung part.
Specifications
- Screen Type: OEM OLED (glass replaced)
- Display Size: 6.6"
- Resolution: 1080 x 2340 pixels
- Fingerprint Sensor: In-display reader supported
- Middle Frame: Pre-installed
- Colours: Black
- Glass Rating: 9H
- Battery: Not included
- Warranty: 12 Months
How do I find my Model number?
Samsung Galaxy A34 5G
Compatible Model Numbers
Samsung Galaxy A34 5GModel Number (SM Number)
- SM-A346B
- SM-A346B/DS
- SM-A346B/DSN
- SM-A346E
- SM-A346E/DS
- SM-A346E/DSN
- SM-A346M
- SM-A346M/N
- SM-A346M/DSN
- SM-A3460
Installation Help
Check out the video above for assistance with this repair
Here are some tools you may need to help you complete the repair.
- #00 Metal Phillips 2.0mm Screwdriver Tool (PH00)
- uFix iOpener Microwaveable Heated Bag Opening Tool
- iGadget 5 piece opening picks
- 5x iGadget Plastic Flexible Opening Cards
- iPlastix Flexible Opening Tool by Dottorpod
- Nylon Antistatic Spudger Pry Tool
- Mechanic AK-15 King ESD Anti-Static Stainless Steel Red Curved Tweezers
- Box of Isopropyl Adhesive Cleaning Alcohol Pad Wipes x100
- 4mm Tesa Tape 61395 Roll Double Sided Adhesive Tape (50m)
Here are some helpful tips to assist you in completing a safe repair on your device. If you are unsure of something or have any questions, please feel free to contact us either by phone (0508 IGADGET) or by email
- Drain the battery below 25% before you start on this repair
- Power the phone off and take out the SIM tray before you open it.
- The plastic back cover is glued on. Warm the edges gently with the iOpener in short bursts, as too much heat can damage the battery and the plastic cover, then work a pick around the edge no more than 3 to 5mm in, or you can cut the antenna, side key or camera cables.
- Always track your screws (Phillips #00) so they go back in the right place. Draw a picture of your phone and tape the screws to it, or use a screw mat
- Always unplug the battery before you remove any other parts. Keep metal tools away from the battery, and never bend, crush or puncture it.
- Move the motherboard, sub-board, cameras and flex cables from your old frame into the new one. The battery is not included and is glued in: loosen its adhesive with isopropyl alcohol and lift it slowly with a plastic card, never prying against the cell, or fit a new battery.
- Test the display, touch, fingerprint reader, cameras and calls before you close the phone up, and leave the protective film and stickers on until the new screen is working properly. If the fingerprint reader doesn't recognise you, delete your saved fingerprints and register them again in Settings, Security and privacy, Biometrics.
- Opening the phone breaks the factory seal. Fit new adhesive (a strip of 4mm Tesa tape where the old adhesive was) when you close it up, or the phone will lose its water resistance rating.
What’s In The Box
- 1x Samsung Galaxy A34 5G OEM OLED Screen Replacement with Middle Frame

In Stock