
Frequently Bought Together
Product Details

Is your Galaxy Z Fold 4 inner screen cracked, showing lines or black patches, or no longer responding to touch? This is a refurbished genuine Samsung folding OLED inner (main) screen, fitted to its frame with the hinge, for the Galaxy Z Fold 4 (SM-F936B).
- GENUINE SAMSUNG PANEL - A refurbished genuine Samsung folding OLED in the original 7.6" size and 1812 x 2176 resolution, so colours, contrast and touch match the screen you had.
- FRAME AND HINGE PRE-INSTALLED, LESS RISK - The folding screen comes fitted to its frame with the hinge already in place, so there's no prying a glued folding panel off your old frame, the step where most DIY screen repairs go wrong.
- S PEN SUPPORT - Works with the S Pen Fold Edition, just like the original Fold 4 inner screen, so you can keep writing and drawing on the big screen.
- TOUGH, SMUDGE RESISTANT FINISH - Scratch resistant glass with an oleophobic coating, so it resists fingerprints and wipes clean of smudges.
- PRECISE FIT - The cutouts, brackets and screw points line up with the original, so the screen sits flush and your phone closes up properly.
- SENT FROM NZ STOCK - Shipped from our New Zealand stock, so there's no waiting weeks for a part to arrive from overseas.
Part Includes:
- Samsung Galaxy Z Fold 4 inner folding screen (refurbished genuine Samsung OLED)
- Frame with hinge (pre-installed)
- 12 Month Warranty
Please Note
Does NOT fit the Fold 3 or Fold 5, which look similar. Check in Settings, About phone for your model.
Please Note
Your boards, both batteries, cover screen and back glass move across to the new frame. They are not included.
Please Note
Refurbished genuine Samsung panel, supplied without a screen protector fitted.
Specifications
- Screen Type: Refurbished genuine Samsung folding OLED
- Display Size: 7.6" folding (inner main screen)
- Resolution: 1812 x 2176 pixels
- S Pen: Supported (S Pen Fold Edition)
- Frame: Pre-installed
- Hinge: Pre-installed
- Glass Rating: 9H
- Screen Protector: Not fitted
- Cover Screen, Back Glass and Batteries: Not included
- Warranty: 12 Months
Compatible Model Numbers
Samsung Galaxy Z Fold 4Model Number (SM Number)
- SM-F936B
- SM-F936B/DS
- SM-F936U
- SM-F936U1
- SM-F936N
- SM-F936W
- SM-F9360
Installation Help
Here are some tools you may need to help you complete the repair.
- #00 Metal Phillips 2.0mm Screwdriver Tool (PH00)
- Large Blue Suction Cup Opening Tool
- uFix iOpener Microwaveable Heated Bag Opening Tool
- iGadget 5 piece opening picks
- 5x iGadget Plastic Flexible Opening Cards
- iPlastix Flexible Opening Tool by Dottorpod
- Nylon Antistatic Spudger Pry Tool
- Mechanic AK-15 King ESD Anti-Static Stainless Steel Red Curved Tweezers
- Box of Isopropyl Adhesive Cleaning Alcohol Pad Wipes x100
- 4mm Tesa Tape 61395 Roll Double Sided Adhesive Tape (50m)
Here are some helpful tips to assist you in completing a safe repair on your device. If you are unsure of something or have any questions, please feel free to contact us either by phone (0508 IGADGET) or by email
- Drain the battery below 25% before you start on this repair
- Power the phone off and take out the SIM tray before you open it.
- The back glass is glued on. Warm the edges gently with the iOpener in short bursts, as too much heat can damage the batteries, then lift an edge with the suction cup and work a pick around no more than 3 to 5mm in, or you can cut the cables underneath.
- Always track your screws (Phillips #00) so they go back in the right place. The Fold 4 has a lot of them, so draw a picture of your phone and tape the screws to it, or use a screw mat
- Always unplug the battery before you remove any other parts. Keep metal tools away from the battery, and never bend, crush or puncture it.
- The Fold 4 has two batteries, one in each half. Unplug both before you go any further.
- Move the boards, cameras, flex cables and both batteries from your old frame into the new one. The batteries are not included and are glued in: loosen their adhesive with isopropyl alcohol and lift them slowly with a plastic card, never prying against the cells.
- The cover (outside) screen and the back glass move across to the new frame as well. If the cover screen is cracked too, fit our Fold 4 Outer Cover Screen at the same time.
- Test the inner screen, touch, folding, S Pen, cover screen and cameras before you seal the back, and leave any protective film and stickers on until the new screen is working properly.
- Opening the phone breaks the factory seal. Fit new adhesive (a strip of 4mm Tesa tape where the old adhesive was) when you close it up, or the phone will lose its water resistance rating.
What’s In The Box
- 1x Samsung Galaxy Z Fold 4 Inner Folding Screen Replacement with Frame and Hinge
