
Often bought with this part

Product Details
Is your iPad Pro 12.9-inch 1st Gen charging port not working? If it feels loose, charges on and off, won't connect to a computer, won't play audio through the port or isn't charging at all, a new charging port (also called the charger port or Lightning dock connector) is usually the repair you need.
- PORT AND FLEX IN ONE PIECE - The Lightning connector comes fitted to its flex cable, so the worn port and its cable are both replaced.
- MADE FOR MICROSOLDERING - The flex solders onto the same logic board pads as the original, for repairers with a microscope and fine-tip iron.
- MADE FOR THE WI-FI MODEL - The Wi-Fi and Cellular models use different flex cables, so this one is made for the Wi-Fi model only.
- SENT FROM NZ STOCK - Shipped from our New Zealand stock, so there's no waiting weeks for a part to arrive from overseas.
Part Includes:
- Lightning connector with flex cable
- 12 Month Warranty
Please Note
Wi-Fi model (A1584) only. Does NOT fit the Cellular model (A1652), which uses its own flex, or the iPad Pro 12.9-inch 2nd Gen. Check the A-number on the back of your iPad, or in Settings, General, About.
Please Note
The port colour only shows inside the port and can't be seen from the outside. Choose black or white to suit the inside of your current port.
Please Note
Professional repair: this flex is soldered to the logic board, so fitting it needs microsoldering equipment.
Specifications
- Part Type: Charging port flex cable
- Connector: Lightning (8-pin)
- Fitting: Soldered to the logic board (microsoldering)
- Model Type: Wi-Fi (A1584)
- Colour: Black or White
- Pairing: Not needed. The charging port isn't a paired part, so no Unknown Part message.
- Warranty: 12 Months
Compatible Model Numbers
Model Number (A Number)
- A1584
iPad Pro 12.9" (1st Gen) WiFi Model Numbers
Model Identifier
- iPad6,7
EMC Number
- EMC 2838
Device Number (M Number)
- ML0F2
- ML0G2
- ML0H2
- ML0N2
- ML0Q2
- ML0R2
- ML0T2
- ML0U2
- ML0V2
Installation Help
Check out the video above for assistance with this repair
Here are some tools you may need to help you complete the repair.
Please note: A discounted simple toolset with the tools you need is available in a pop-up when you add this product to cart
- #00 Metal Phillips 2.0mm Screwdriver Tool (PH00)
- Or get the #00 screwdriver in our 10 Piece Samsung, Android and iPad Repair Tool Kit
- uFix iOpener Microwaveable Heated Bag Opening Tool
- CPB 320 Repair Heat Pad for mobile phones and tablets
- Large Blue Suction Cup Opening Tool
- iGadget Plastic Triangle Opening Picks (set of 5)
- Nylon Antistatic Spudger Pry Tool
- Mechanic AK-15 King ESD Anti-Static Stainless Steel Red Curved Tweezers
- Amtech NC-559-ASM 10cc Lead Free No-Clean Soldering Flux from JiyangSolder- 10ml
- iGadget Plastic Alcohol 200mL Bottle with Pump Top
- Tesa 61395 Double Sided Adhesive Tape 2mm
- iGadget Universal Magnetic Work Project Mat with Marker (30cm x 25cm)
Here are some helpful tips to assist you in completing a safe repair on your device. If you are unsure of something or have any questions, please feel free to contact us either by phone (0508 IGADGET) or by email
- Drain the battery below 25% before you start on this repair
- Power the iPad off before you start, and tape over cracked glass so it lifts in one piece.
- Warm the edges with the iOpener or heat pad in short passes, as too much heat can damage the battery.
- Keep opening picks shallow, as the display cables and antennas sit just inside the edge.
- Disconnect the battery before you work on the board. Keep metal tools away from the battery, and never bend, crush or puncture it.
- Always track your screws on a magnetic mat, as they are different lengths.
- The charging port flex is soldered to the logic board. Fitting it needs a microscope, flux and a fine-tip soldering iron or hot air station.
- Test charging and connecting to a computer before you stick the screen back down.
- Clean the old adhesive off with isopropyl alcohol and lay new 2mm Tesa tape round the frame before you stick the screen back down.
What’s In The Box
- 1x iPad Pro 12.9-inch 1st Gen Wi-Fi charging port flex cable

In Stock