
Often bought with this part

Product Details
Cracked glass on your iPad 9, 8 or 7, touch not working or a damaged home button? On these 10.2-inch iPads the glass and touch digitiser are one part, separate from the LCD, and this one comes with the home button already fitted.
Also for the iPad 9 / 8 / 7: Glass and Digitiser without Home Button (keep your own button and Touch ID) · LCD (when only the picture is damaged)
- HOME BUTTON PRE-FITTED - The home button comes fitted flush in the glass, so there's no heating and prying your old button and bracket off the broken glass.
- ORIGINAL-STYLE CONSTRUCTION - Copper internal framing with original-style flex cables and circuit routing, the build quality that keeps touch reliable instead of drifting into ghost touch.
- STRONG, THIN GLASS - High-alumina glass, about 18% thinner than other replacements we tested, so it sits close to the original thickness.
- TESA TAPE PRE-FITTED - Pressure-activated Tesa 61395 tape comes fitted round the edge, so there's no cutting and laying adhesive strips, and the glass seals down firmly.
- SENT FROM NZ STOCK - Shipped from our New Zealand stock, so there's no waiting weeks for a part to arrive from overseas.
Part Includes:
- Glass and touch digitiser
- Home button, pre-fitted
- Pre-fitted Tesa 61395 adhesive
- Anti-static foam border
- Front camera brackets for the iPad 7/8 and iPad 9
- 12 Month Warranty
Please Note
Does NOT fit the iPad 10, iPad Air 3, iPad Pro 10.5" or the 9.7" iPad 5 and 6, which use different screens. Check in Settings, General, About for your model.
Please Note
The two front camera brackets are not fitted. One is for the iPad 7 and 8 and one for the iPad 9, so fit the one that matches your iPad.
Please Note
The fitted home button works as a home button but not for Touch ID, which only works with your iPad's original button.
Specifications
- Type: Glass and touch digitiser (no LCD)
- Size: 10.2-inch
- Adhesive: Tesa 61395 pre-fitted
- Home Button: Included, pre-fitted (no Touch ID)
- Camera Bracket: iPad 7/8 and iPad 9 brackets included, not fitted
- Glass Type: High-alumina glass
- Colours: Black and White
- Pairing: Not needed. This iPad doesn't check its screen, so no Unknown Part message.
- Warranty: 12 Months
Compatible Model Numbers
iPad 9 (2021) WiFiModel Number (A Number)
- A2602
iPad 9 (2021) WiFi Model Numbers
Model Identifier
- iPad12,1
EMC Number
- EMC 4045
Device Number (M Number)
- MK2L3
- MK2P3
- MK2K3
- MK2N3
iPad 9 (2021) WiFi + CellularModel Number (A Number)
- A2603
- A2604
- A2605
iPad 9 (2021) WiFi + Cellular Model Numbers
Model Identifier
- iPad12,2
EMC Number
- EMC 4046
Device Number (M Number)
- MK673
- MK6A3
- MK663
- MK693
- MK493
- MK4H3
- MK473
- MK4E3
- MK613
- MK643
- MK603
- MK633
iPad 8 (2020) WiFiModel Number (A Number)
- A2270
iPad 8 (2020) WiFi Model Numbers
Model Identifier
- iPad11,6
EMC Number
- EMC 3574
Device Number (M Number)
- MYL92
- MYLA2
- MYLC2
- MYLD2
- MYLE2
- MYLF2
iPad 8 (2020) WiFi + CellularModel Number (A Number)
- A2428
- A2429
- A2430
iPad 8 (2020) WiFi + Cellular Model Numbers
Model Identifier
- iPad11,7
EMC Number
- EMC 3575
Device Number (M Number)
- MYMH2
- MYMJ2
- MYMK2
- MYML2
- MYMM2
- MYMN2
- MYN32
- MYN52
- MYN62
- MYN72
- MYN82
- MYN92
iPad 7 (2019) WiFiModel Number (A Number)
- A2197
iPad 7 (2019) WiFi Model Numbers
Model Identifier
- iPad7,11
EMC Number
- EMC 3323
Device Number (M Number)
- MW742
- MW752
- MW762
- MW772
- MW782
- MW792
iPad 7 (2019) WiFi + CellularModel Number (A Number)
- A2198
- A2199
- A2200
iPad 7 (2019) WiFi + Cellular Model Numbers
Model Identifier
- iPad7,12
EMC Number
- EMC 3324
Device Number (M Number)
- MW6A2
- MW6C2
- MW6D2
- MW6E2
- MW6F2
- MW6G2
- MW6P2
- MW6Q2
- MW6R2
- MW6T2
- MW6U2
- MW6V2
- MW6W2
- MW6X2
- MW6Y2
- MW702
- MW712
- MW722
Installation Help
Check out the video above or the step by step guide below for assistance with this repair
The guide shows the iPad 8, which comes apart the same way as the iPad 7 and 9.
iFixit iPad 8 Screen Digitizer Replacement Guide
Here are some tools you may need to help you complete the repair.
Please note: A discounted simple toolset with the tools you need is available in a pop-up when you add this product to cart
- #000 1.5mm Metal Phillips Screwdriver Tool (PH000)
- #00 Metal Phillips 2.0mm Screwdriver Tool (PH00)
- uFix iOpener Microwaveable Heated Bag Opening Tool
- CPB 320 Repair Heat Pad for mobile phones and tablets
- Large Blue Suction Cup Opening Tool
- iGadget Plastic Triangle Opening Picks (set of 5)
- iPlastix Flexible Opening Tool by Dottorpod
- 5x iGadget Plastic Flexible Opening Cards
- Nylon Antistatic Spudger Pry Tool
- Mechanic AK-15 King ESD Anti-Static Stainless Steel Red Curved Tweezers
- iGadget Universal Magnetic Work Project Mat with Marker (30cm x 25cm)
Here are some helpful tips to assist you in completing a safe repair on your device. If you are unsure of something or have any questions, please feel free to contact us either by phone (0508 IGADGET) or by email
- Drain the battery below 25%, power the iPad off before you start, and tape over cracked glass so it lifts in one piece.
- Warm the edges with the iOpener or heat pad in short passes, as too much heat can damage the battery.
- Keep opening picks only 1mm in along the bottom edge by the antennas and never over the front camera. Use the iPlastix by the antennas.
- Disconnect the battery before you unplug anything else: slide a plastic card under its spring contacts without force, as they bend easily. Keep metal tools away from it, and never bend, crush or puncture it.
- Always track your screws on a magnetic mat, so each goes back in the right place.
- Refit press connectors by pressing one side then the other until they click, never the middle.
- The home button comes fitted, so just plug its cable into the connector with tweezers and flip the locking flap down.
- Test touch, the home button and the picture before you seal it, and leave the protective film on until the new screen works. If it doesn't turn on or show a picture, force restart it by holding the top button and Home button until the Apple logo appears.
- Fit the camera bracket that matches your iPad (7/8 or 9), facing the same way as the one on your old screen. Leave the small window to the right of the camera clear, as the light sensor reads through it for auto-brightness and True Tone.
- Clean the old adhesive off the frame with isopropyl alcohol before you stick the glass down, and hold it while the adhesive sets.
What’s In The Box
- 1x iPad 9 / 8 / 7 10.2-inch glass and digitiser with home button, Tesa adhesive and foam pre-fitted
- 2x front camera brackets (iPad 7/8 and iPad 9)

In Stock
