
Things you may need for this repair


Product Details
Lines, dead pixels, colour bleeding or a black screen on your iPad 6, iPad 5 or iPad Air? These three 9.7-inch iPads take the same LCD, a separate panel under the touch glass, so if touch still works you only need a new LCD.
Also for these iPads: iPad 6 Glass and Digitiser · iPad 5 and iPad Air Glass and Digitiser (cracked glass or touch faults)
- SHARP 9.7-INCH PICTURE - 2048 x 1536 resolution at 264 ppi, the same as the display these iPads came with.
- ONE LCD, THREE IPADS - Fits the iPad 6, iPad 5 and the first iPad Air, so there's no guessing which panel you need.
- LCD ONLY, LOWER COST - If your glass is fine and only the picture is damaged, you replace just the LCD and keep your glass and home button.
- SENT FROM NZ STOCK - Shipped from our New Zealand stock, so there's no waiting weeks for a part to arrive from overseas.
Part Includes:
- LCD display panel
- 12 Month Warranty
Please Note
Does NOT fit the iPad Air 2, iPad Pro 9.7" or the 10.2" iPad 7, 8 and 9, which use different screens. Check in Settings, General, About for your model.
Please Note
LCD only. The touch glass is a separate part, so if touch has also stopped working you'll need the glass and digitiser for your iPad as well.
Please Note
Brand new LCD, made by a third party and not an official Apple part.
Specifications
- Display Size: 9.7-inch (diagonal)
- LCD Resolution: 2048 x 1536 pixels
- Refresh Rate: 60Hz
- Pixel Density: 264 pixels per inch (ppi)
- Type: LCD panel only (no glass or digitiser)
- Condition: Brand new
- Pairing: Not needed. This iPad doesn't check its screen, so no Unknown Part message.
- Warranty: 12 Months
Compatible Model Numbers
Model Number (A Number)
- A1893
iPad 6 WiFi Model NumbersHow do I find my Model number?
Model Identifier
- iPad7,5
EMC Number
- EMC 3210
Device Number (M Number)
- MR7F2
- MR7G2
- MR7J2
- MR7K2
- MRJN2
- MRJP2
Model Number (A Number)
- A1954
iPad 6 WiFi + Cellular Model NumbersHow do I find my Model number?
Model Identifier
- iPad7,6
EMC Number
- EMC 3211
Device Number (M Number)
- MR702
- MR6Y2
- MR7C2
- MR7D2
- MRM52
- MRM82
Model Number (A Number)
- A1822
iPad 5 WiFi Model NumbersHow do I find my Model number?
Model Identifier
- iPad6,11
EMC Number
- EMC 3017
Device Number (M Number)
- MP2F2
- MP2G2
- MP2H2
- MP2J2
- MPGT2
- MPGW2
Model Number (A Number)
- A1823
iPad 5 WiFi + Cellular Model NumbersHow do I find my Model number?
Model Identifier
- iPad6,12
EMC Number
- EMC 3108
Device Number (M Number)
- MP242
- MP252
- MP2D2
- MP2E2
- MPGA2
- MPGC2
Model Number (A Number)
- A1474
iPad Air WiFi Model NumbersHow do I find my Model number?
Model Identifier
- iPad4,1
EMC Number
- EMC 2646
Device Number (M Number)
- MD785
- MD786
- MD787
- MD788
- MD789
- MD790
- ME898
- ME906
Model Number (A Number)
- A1475
- A1476
iPad Air WiFi + Cellular Model NumbersHow do I find my Model number?
Model Identifier
- iPad4,2
- iPad4,3
EMC Number
- EMC 2647
Device Number (M Number)
- MD791
- MD792
- MD793
- MD794
- MD795
- MD796
- MD797
- MD798
- MD799
- ME987
- ME988
- ME991
- ME993
- ME997
- ME999
- MF003
- MF004
- MF009
- MF010
- MF012
- MF013
- MF015
- MF016
- MF018
- MF019
- MF020
- MF021
- MF024
- MF025
- MF026
- MF027
- MF028
- MF029
- MF230
- MF233
- MF234
- MF235
- MF236
- MF496
- MF502
- MF520
- MF527
- MF529
- MF532
- MF534
- MF539
- MF558
- MF563
Installation Help
Check out the video above or the step by step guide below for assistance with this repair
The video and guide show the iPad 6. The iPad 5 and iPad Air come apart the same way.
iFixit iPad 6 LCD Replacement Guide
Here are some tools you may need to help you complete the repair.
Please note: A discounted simple toolset with the tools you need is available in a pop-up when you add this product to cart
- #000 1.5mm Metal Phillips Screwdriver Tool (PH000)
- #00 Metal Phillips 2.0mm Screwdriver Tool (PH00)
- uFix iOpener Microwaveable Heated Bag Opening Tool
- CPB 320 Repair Heat Pad for mobile phones and tablets
- Large Blue Suction Cup Opening Tool
- iGadget Plastic Triangle Opening Picks (set of 5)
- iPlastix Flexible Opening Tool by Dottorpod
- 5x iGadget Plastic Flexible Opening Cards
- Nylon Antistatic Spudger Pry Tool
- iGadget Plastic Alcohol 200mL Bottle with Pump Top
- 2mm Tesa Tape 61395 Roll Double Sided Adhesive Tape (100m)
- iGadget Universal Magnetic Work Project Mat with Marker (30cm x 25cm)
Here are some helpful tips to assist you in completing a safe repair on your device. If you are unsure of something or have any questions, please feel free to contact us either by phone (0508 IGADGET) or by email
- Drain the battery below 25% and power the iPad off before you start.
- Warm the edges with the iOpener or heat pad in short passes, as too much heat can damage the battery.
- You're refitting the original glass, so go slowly, as forcing it can crack it.
- Keep opening picks only a few millimetres in along the bottom edge by the antennas, never over the front camera, and slow down at the right edge by the display cables. Use the iPlastix by the antennas.
- Disconnect the battery before you unplug anything else: slide a plastic card under its spring contacts without force, as they bend easily. Keep metal tools away from it, and never bend, crush or puncture it.
- Always track your screws on a magnetic mat, so each goes back in the right place. On the iPad 5 the four LCD screws are different lengths, so note where each goes.
- Refit press connectors by pressing one side then the other until they click, never the middle.
- Test the picture and touch before you seal it, and leave the protective film on until the new LCD works. If it doesn't turn on or show a picture, force restart it by holding the top button and Home button until the Apple logo appears.
- Clean the old adhesive off with isopropyl alcohol and lay new 2mm Tesa tape round the frame before you stick the glass back down.
What’s In The Box
- 1x iPad 6 / iPad 5 / iPad Air 9.7-inch replacement LCD

In Stock