
Things you may need for this repair


Product Details
If you have smashed the back glass on your iPhone 17 Pro, you will need this glass replacement. This rear glass includes the back clip-in frame and includes small parts such as the MagSafe magnets.
Part Includes:
- Back Coloured Glass
- Perfect fit clip-in Frame
- MagSafe Magnets preinstalled
- Wireless Coil Preattached
FYI
Replacement Rear Glass does not include back panel adhesive
Specifications
- Type: Rear Glass Assembly
- Colours: Deep Blue
- Warranty: 12 Months
Compatible Model Numbers
iPhone 17 ProModel Number (A Number)
- A3256
- A3522
- A3523
- A3524
iPhone 17 Pro Model Numbers
Model Identifier
- iPhone18,1
EMC Number
- EMC 8949
- EMC 8957
- EMC 8958
- EMC 8959
Device Number (M Number)
- MG7K4
- MG7N4
- MG7R4
- MG7P4
- MG7T4
- MG7M4
- MG7Q4
- MG7U4
- MG894
- MG854
- MG8E4
- MG874
- MG8C4
- MG8F4
- MG8G4
- MG8K4
- MG8P4
- MG8M4
- MG8Q4
- MG8J4
- MG8N4
- MG8R4
- MG8T4
- MG8W4
- MG904
- MG8U4
- MG8X4
- MG8V4
- MG8Y4
- MG924
Installation Help
Watch the above video or checkout the step-by-step guide below for assistance in completing this repair
Here are some tools you may need to help you complete the repair.
- Phillips #000 Screwdriver
- P2 Pentalobe Screwdriver
- Y000 Triwing tri-point Screwdriver
- iSclack opening tool
- Suction Cup
- Fine Tipped Curved Tweezers
- iGadget 5 piece opening picks
- Black Spudger
- uFix iOpener Heat bag
- iHold Evo Screen Holder
Here are some helpful tips to assist you in completing a safe repair on your device. If you are unsure of something or have any questions, please feel free to contact us either by phone (0508 IGADGET) or by email
- Always track your screws to avoid putting back in the wrong place and damaging your device. You can draw a picture of your phone and tape the screws to the right places or use a screw mat
- Always power down your device prior to working on it
- Make sure you always unplug the battery before attempting any component removal
- The connector to the logicboard can be tricky to align correctly so it fits into place, we recommend taking a pencil and tracing the original charging port so you know exactly where it gets positioned and lining the new charger port within the pencil lines
- Don't forget to remove the sim tray when removing the logicboard
What’s In The Box
- 1x iPhone 17 Pro Replacement Rear Glass Assembly

In Stock