
Things you may need for this repair


Product Details
Cracked screen on your iPad Mini 6, touch not responding or no picture? On the iPad Mini 6 the glass, touch digitiser and LCD are bonded together as one part, so a cracked screen is fixed by replacing the whole assembly. This is a brand new aftermarket screen, not an official Apple part.
- COMPLETE SCREEN ASSEMBLY - Glass, touch digitiser and LCD bonded together and ready to fit, so there's no separating layers.
- SHARP 8.3-INCH PICTURE - 2266 x 1488 resolution at 326 ppi, the same as the display your iPad came with.
- TESA TAPE PRE-FITTED - Tesa adhesive comes fitted round the edge, so there's no cutting and laying adhesive strips.
- SENT FROM NZ STOCK - Shipped from our New Zealand stock, so there's no waiting weeks for a part to arrive from overseas.
Part Includes:
- 8.3-inch LCD and touch digitiser assembly
- Pre-fitted Tesa adhesive
- 12 Month Warranty
Please Note
Does NOT fit the iPad Mini 5 or older. Not confirmed to fit the 2024 iPad Mini 7 (A17 Pro). Check the A number on the back of your iPad.
Please Note
Apple Pencil 2 works with this screen with no chip to move across from your old screen (confirmed by our supplier).
Specifications
- Display Size: 8.3-inch (diagonal)
- Resolution: 2266 x 1488 pixels (326 ppi)
- Display Type: LCD
- Refresh Rate: 60Hz
- Type: LCD and touch digitiser assembly, glass laminated
- Adhesive: Tesa tape pre-fitted
- Home Button: None. Touch ID is in the top button, so nothing moves across
- Colour: Black
- Condition: Brand new aftermarket
- Pairing: Not needed. This iPad doesn't check its screen, so no Unknown Part message.
- Warranty: 12 Months
Compatible Model Numbers
iPad Mini 6 WiFiModel Number (A Number)
- A2567
iPad Mini 6 WiFi Model NumbersHow do I find my Model number?
Model Identifier
- iPad14,1
EMC Number
- EMC 4043
Device Number (M Number)
- MK7M3
- MK7T3
- MLWL3
- MLWR3
- MK7R3
- MK7X3
- MK7P3
- MK7V3
iPad Mini 6 WiFi + CellularModel Number (A Number)
- A2568
- A2569
iPad Mini 6 WiFi + Cellular Model NumbersHow do I find my Model number?
Model Identifier
- iPad14,2
EMC Number
- EMC 4044
Device Number (M Number)
- MK893
- MK8F3
- MLX43
- MLX93
- MK8E3
- MK8K3
- MK8C3
- MK8Y3
- MK943
- MLXA3
- MLXG3
Installation Help
Check out the video above or the step by step guide below for assistance with this repair
iFixit iPad Mini 6 Screen Replacement Guide
Here are some tools you may need to help you complete the repair.
Please note: A discounted simple toolset with the tools you need is available in a pop-up when you add this product to cart
- Mini #000 Metal Magnetic Phillips 1.2mm Screwdriver Tool
- uFix iOpener Microwaveable Heated Bag Opening Tool
- CPB 320 Repair Heat Pad for mobile phones and tablets
- Large Blue Suction Cup Opening Tool
- iGadget Plastic Triangle Opening Picks (set of 5)
- Nylon Antistatic Spudger Pry Tool
- Mechanic AK-15 King ESD Anti-Static Stainless Steel Red Curved Tweezers
- iGadget Plastic Alcohol 200mL Bottle with Pump Top
- iGadget Universal Magnetic Work Project Mat with Marker (30cm x 25cm)
Here are some helpful tips to assist you in completing a safe repair on your device. If you are unsure of something or have any questions, please feel free to contact us either by phone (0508 IGADGET) or by email
- Drain the battery below 25% before you start on this repair
- Power the iPad off before you start, and tape over cracked glass so it lifts in one piece.
- Keep metal tools away from the battery and board, and never bend, crush or puncture the battery.
- Warm the edges with the iOpener or heat pad in short passes, as too much heat can damage the battery.
- Keep opening picks no deeper than 3mm at the top and bottom, and 1.5mm near the front camera. A long circuit board runs along the left edge of the screen.
- Always track your screws on a magnetic mat, as they are different lengths.
- Refit press connectors by pressing one side then the other until they click, never the middle.
- Test touch, the picture and Touch ID in the top button before you seal it, and leave the protective film on until the new part works.
- Clean the old adhesive off the frame with isopropyl alcohol before you stick the screen down, and hold it while the adhesive sets.
What’s In The Box
- 1x iPad Mini 6 replacement LCD and digitiser assembly, Tesa adhesive pre-fitted

In Stock