
Often bought with this part

Product Details
Cracked glass on your iPad Mini 3, or a broken home button as well? This glass and touch digitiser comes with a home button already fitted, so there's no moving the old button across. The LCD is a separate part, so if the picture still shows you only need the glass.
Also for the iPad Mini 3: Glass without Home Button (keep Touch ID) · LCD (when the picture is damaged)
- TOUCH DIGITISER BUILT IN - Glass and touch layer in one, with the touch flex and IC board already fitted.
- ADHESIVE PRE-FITTED - Adhesive comes fitted round the edge, so there's no cutting and laying adhesive strips.
- HOME BUTTON PRE-FITTED - A home button and bracket come fitted, so there's no moving the old one across.
- SENT FROM NZ STOCK - Shipped from our New Zealand stock, so there's no waiting weeks for a part to arrive from overseas.
Part Includes:
- Glass and touch digitiser
- Home button and IC board, fitted
- Pre-fitted adhesive
- 12 Month Warranty
Please Note
Does NOT fit the iPad Mini 1 or Mini 2, which take a different glass, or the iPad Mini 4, where the glass is bonded to the LCD. Check the A number on the back of your iPad.
Please Note
The fitted home button works as a button, but Touch ID only works with your iPad's original button. To keep Touch ID, get the glass without a home button and move yours across.
Specifications
- Type: Glass and touch digitiser (no LCD)
- Size: 7.9-inch
- Home Button: Fitted (works as a button, no Touch ID)
- IC Board: Fitted
- Adhesive: Pre-fitted
- Colour: Black or White
- Condition: Brand new aftermarket
- Pairing: Not needed. This iPad doesn't check its screen, so no Unknown Part message.
- Warranty: 12 Months
Compatible Model Numbers
iPad Mini 3 WiFiModel Number (A Number)
- A1599
iPad Mini 3 WiFi Model NumbersHow do I find my Model number?
Model Identifier
- iPad4,7
EMC Number
- EMC 2848
Device Number (M Number)
- MGGQ2
- MGGT2
- MGNR2
- MGNV2
- MGP32
- MGP42
- MGY92
- MGYE2
- MGYK2
iPad Mini 3 WiFi + CellularModel Number (A Number)
- A1600
- A1601
iPad Mini 3 WiFi + Cellular Model NumbersHow do I find my Model number?
Model Identifier
- iPad4,8
- iPad4,9
EMC Number
- EMC 2849
Device Number (M Number)
- MH372
- MH382
- MH392
- MH3E2
- MH3F2
- MH3G2
- MH3L2
- MH3M2
- MH3N2
Installation Help
Check out the video above or the step by step guide below for assistance with this repair
The video shows the glass without a fitted button; with this part you can skip moving the home button.
iFixit iPad Mini 3 Front Panel Replacement Guide
Here are some tools you may need to help you complete the repair.
Please note: A discounted simple toolset with the tools you need is available in a pop-up when you add this product to cart
- #00 Metal Phillips 2.0mm Screwdriver Tool (PH00)
- uFix iOpener Microwaveable Heated Bag Opening Tool
- CPB 320 Repair Heat Pad for mobile phones and tablets
- Large Blue Suction Cup Opening Tool
- iGadget Plastic Triangle Opening Picks (set of 5)
- Nylon Antistatic Spudger Pry Tool
- Mechanic AK-15 King ESD Anti-Static Stainless Steel Red Curved Tweezers
- iGadget Plastic Alcohol 200mL Bottle with Pump Top
- iGadget Universal Magnetic Work Project Mat with Marker (30cm x 25cm)
Here are some helpful tips to assist you in completing a safe repair on your device. If you are unsure of something or have any questions, please feel free to contact us either by phone (0508 IGADGET) or by email
- Drain the battery below 25% before you start on this repair
- Power the iPad off before you start, and tape over cracked glass so it lifts in one piece.
- Disconnect the battery before you unplug anything else. Keep metal tools away from it, and never bend, crush or puncture it.
- Warm the edges with the iOpener or heat pad in short passes, as too much heat can damage the battery.
- Only slip the tips of opening picks in near the front camera at the top, and keep clear of the Wi-Fi antenna along the bottom edge.
- Always track your screws on a magnetic mat, as they are different lengths.
- Refit press connectors by pressing one side then the other until they click, never the middle.
- The new glass comes with a home button fitted. To keep Touch ID instead, move your original button across.
- Test touch, the picture and the home button before you seal it, and leave the protective film on until the new screen works.
- Clean the old adhesive off the frame with isopropyl alcohol before you stick the glass down, and hold it while the adhesive sets.
What’s In The Box
- 1x iPad Mini 3 glass and digitiser, home button, IC board and adhesive fitted

In Stock