
Often bought with this part

Product Details
Cracked glass on your iPad Mini 3, or touch not working? On the iPad Mini 3 the glass and touch digitiser are one part, separate from the LCD, so if the picture still shows you only need to replace the glass. Move your own home button across and Touch ID keeps working.
Also for the iPad Mini 3: Glass with Home Button (button pre-fitted) · LCD (when the picture is damaged)
- TOUCH DIGITISER BUILT IN - Glass and touch layer in one, with the touch flex and IC board already fitted.
- ADHESIVE PRE-FITTED - Adhesive comes fitted round the edge, so there's no cutting and laying adhesive strips.
- KEEP TOUCH ID - No home button fitted, so your original moves across and Touch ID keeps working.
- SENT FROM NZ STOCK - Shipped from our New Zealand stock, so there's no waiting weeks for a part to arrive from overseas.
Part Includes:
- Glass and touch digitiser
- IC board, fitted
- Pre-fitted adhesive
- 12 Month Warranty
Please Note
Does NOT fit the iPad Mini 1 or Mini 2, which take a different glass, or the iPad Mini 4, where the glass is bonded to the LCD. Check the A number on the back of your iPad.
Please Note
Home button not included. Move your own across to keep Touch ID, as a replacement home button can't use it.
Specifications
- Type: Glass and touch digitiser (no LCD)
- Size: 7.9-inch
- Home Button: Not included, your original moves across
- IC Board: Fitted
- Adhesive: Pre-fitted
- Colour: Black or White
- Condition: Brand new aftermarket
- Pairing: Not needed. This iPad doesn't check its screen, so no Unknown Part message.
- Warranty: 12 Months
Compatible Model Numbers
iPad Mini 3 WiFiModel Number (A Number)
- A1599
iPad Mini 3 WiFi Model NumbersHow do I find my Model number?
Model Identifier
- iPad4,7
EMC Number
- EMC 2848
Device Number (M Number)
- MGGQ2
- MGGT2
- MGNR2
- MGNV2
- MGP32
- MGP42
- MGY92
- MGYE2
- MGYK2
iPad Mini 3 WiFi + CellularModel Number (A Number)
- A1600
- A1601
iPad Mini 3 WiFi + Cellular Model NumbersHow do I find my Model number?
Model Identifier
- iPad4,8
- iPad4,9
EMC Number
- EMC 2849
Device Number (M Number)
- MH372
- MH382
- MH392
- MH3E2
- MH3F2
- MH3G2
- MH3L2
- MH3M2
- MH3N2
Installation Help
Check out the video above or the step by step guide below for assistance with this repair
iFixit iPad Mini 3 Front Panel Replacement Guide
Here are some tools you may need to help you complete the repair.
Please note: A discounted simple toolset with the tools you need is available in a pop-up when you add this product to cart
- #00 Metal Phillips 2.0mm Screwdriver Tool (PH00)
- uFix iOpener Microwaveable Heated Bag Opening Tool
- CPB 320 Repair Heat Pad for mobile phones and tablets
- Large Blue Suction Cup Opening Tool
- iGadget Plastic Triangle Opening Picks (set of 5)
- Nylon Antistatic Spudger Pry Tool
- Mechanic AK-15 King ESD Anti-Static Stainless Steel Red Curved Tweezers
- iGadget Plastic Alcohol 200mL Bottle with Pump Top
- B7000 Multipurpose Liquid Repair Glue - 15ml
- iGadget Universal Magnetic Work Project Mat with Marker (30cm x 25cm)
Here are some helpful tips to assist you in completing a safe repair on your device. If you are unsure of something or have any questions, please feel free to contact us either by phone (0508 IGADGET) or by email
- Drain the battery below 25% before you start on this repair
- Power the iPad off before you start, and tape over cracked glass so it lifts in one piece.
- Disconnect the battery before you unplug anything else. Keep metal tools away from it, and never bend, crush or puncture it.
- Warm the edges with the iOpener or heat pad in short passes, as too much heat can damage the battery.
- Only slip the tips of opening picks in near the front camera at the top, and keep clear of the Wi-Fi antenna along the bottom edge.
- Always track your screws on a magnetic mat, as they are different lengths.
- Refit press connectors by pressing one side then the other until they click, never the middle.
- Move your own home button across to keep Touch ID. Its cable is very thin, so slide it out with tweezers slowly, and glue the bracket back with B7000.
- Test touch, the picture, the home button and Touch ID before you seal it, and leave the protective film on until the new screen works.
- Clean the old adhesive off the frame with isopropyl alcohol before you stick the glass down, and hold it while the adhesive sets.
What’s In The Box
- 1x iPad Mini 3 glass and digitiser, IC board and adhesive fitted

In Stock