
Often bought with this part

Product Details
Cracked glass on your iPad Air, touch not working or a damaged home button? On the first iPad Air the glass and touch digitiser are one part, separate from the LCD, and this one comes with an iPad Air home button already fitted.
Also for the iPad Air: Glass and Digitiser without Home Button · LCD (when only the picture is damaged) · iPad 5 Glass with Home Button (for the iPad 5)
- HOME BUTTON PRE-FITTED - The home button comes fitted flush in the glass, so there's no heating and prying your old button and bracket off the broken glass.
- ORIGINAL-STYLE CONSTRUCTION - Copper internal framing with original-style flex cables and circuit routing, the build quality that keeps touch reliable instead of drifting into ghost touch.
- STRONG, THIN GLASS - High-alumina glass, about 18% thinner than other replacements we tested, so it sits close to the original thickness.
- TESA TAPE PRE-FITTED - Pressure-activated Tesa 61395 tape comes fitted round the edge, so there's no cutting and laying adhesive strips, and the glass seals down firmly.
- SENT FROM NZ STOCK - Shipped from our New Zealand stock, so there's no waiting weeks for a part to arrive from overseas.
Part Includes:
- Glass and touch digitiser
- Home button, pre-fitted
- Pre-fitted Tesa 61395 adhesive
- Front camera bracket, pre-fitted
- Anti-static foam border
- 12 Month Warranty
Please Note
Does NOT fit the iPad Air 2, iPad 5, iPad 6 or iPad Pro 9.7". The iPad 5 takes the same glass but a different home button. Check in Settings, General, About for your model.
Please Note
The iPad Air (1st gen) has no Touch ID, so the fitted home button works just like your original.
Specifications
- Type: Glass and touch digitiser (no LCD)
- Size: 9.7-inch
- Adhesive: Tesa 61395 pre-fitted
- Camera Bracket: Pre-fitted
- Home Button: Included, pre-fitted
- Glass Type: High-alumina glass
- Colours: Black and White
- Condition: Brand new
- Pairing: Not needed. This iPad doesn't check its screen, so no Unknown Part message.
- Warranty: 12 Months
Compatible Model Numbers
Model Number (A Number)
- A1474
iPad Air WiFi Model NumbersHow do I find my Model number?
Model Identifier
- iPad4,1
EMC Number
- EMC 2646
Device Number (M Number)
- MD785
- MD786
- MD787
- MD788
- MD789
- MD790
- ME898
- ME906
Model Number (A Number)
- A1475
- A1476
iPad Air WiFi + Cellular Model NumbersHow do I find my Model number?
Model Identifier
- iPad4,2
- iPad4,3
EMC Number
- EMC 2647
Device Number (M Number)
- MD791
- MD792
- MD793
- MD794
- MD795
- MD796
- MD797
- MD798
- MD799
- ME987
- ME988
- ME991
- ME993
- ME997
- ME999
- MF003
- MF004
- MF009
- MF010
- MF012
- MF013
- MF015
- MF016
- MF018
- MF019
- MF020
- MF021
- MF024
- MF025
- MF026
- MF027
- MF028
- MF029
- MF230
- MF233
- MF234
- MF235
- MF236
- MF496
- MF502
- MF520
- MF527
- MF529
- MF532
- MF534
- MF539
- MF558
- MF563
Installation Help
Check out the video above or the step by step guide below for assistance with this repair
iFixit iPad Air Front Panel Replacement Guide
Here are some tools you may need to help you complete the repair.
Please note: A discounted simple toolset with the tools you need is available in a pop-up when you add this product to cart
- #000 1.5mm Metal Phillips Screwdriver Tool (PH000)
- #00 Metal Phillips 2.0mm Screwdriver Tool (PH00)
- uFix iOpener Microwaveable Heated Bag Opening Tool
- CPB 320 Repair Heat Pad for mobile phones and tablets
- Large Blue Suction Cup Opening Tool
- iGadget Plastic Triangle Opening Picks (set of 5)
- iPlastix Flexible Opening Tool by Dottorpod
- 5x iGadget Plastic Flexible Opening Cards
- Nylon Antistatic Spudger Pry Tool
- Mechanic AK-15 King ESD Anti-Static Stainless Steel Red Curved Tweezers
- iGadget Universal Magnetic Work Project Mat with Marker (30cm x 25cm)
Here are some helpful tips to assist you in completing a safe repair on your device. If you are unsure of something or have any questions, please feel free to contact us either by phone (0508 IGADGET) or by email
- Drain the battery below 25%, power the iPad off before you start, and tape over cracked glass so it lifts in one piece.
- Warm the edges with the iOpener or heat pad in short passes, as too much heat can damage the battery.
- Keep opening picks only a few millimetres in along the bottom edge by the antennas, never over the front camera, and slow down at the right edge by the display cables. Use the iPlastix by the antennas.
- Disconnect the battery before you unplug anything else: slide a plastic card under its spring contacts without force, as they bend easily. Keep metal tools away from it, and never bend, crush or puncture it.
- Always track your screws on a magnetic mat, so each goes back in the right place.
- Refit press connectors by pressing one side then the other until they click, never the middle.
- The home button comes fitted, so just plug its cable into the connector with tweezers and flip the locking flap down.
- Test touch, the home button and the picture before you seal it, and leave the protective film on until the new screen works. If it doesn't turn on or show a picture, force restart it by holding the top button and Home button until the Apple logo appears.
- Clean any dust off the LCD and check the camera window in the bracket is clear, then clean the old adhesive off the frame with isopropyl alcohol before you stick the glass down, and hold it while the adhesive sets.
What’s In The Box
- 1x iPad Air 9.7-inch glass and digitiser with home button, Tesa adhesive, camera bracket and foam pre-fitted

In Stock
