
Often bought with this part

Product Details
Cracked screen on your iPad Air 11-inch (M2 or M3), touch not responding or no picture? On these iPads the glass, touch digitiser and LCD are bonded together as one part, so a cracked screen is fixed by replacing the whole assembly. One assembly fits both the 2024 M2 and the 2025 M3, sometimes called the iPad Air 6 and Air 7.
- COMPLETE SCREEN ASSEMBLY - Glass, touch digitiser and LCD bonded together and ready to fit, so there's no separating layers.
- SHARP 11-INCH PICTURE - 2360 x 1640 resolution at 264 ppi, the same as the display your iPad came with.
- TESA TAPE PRE-FITTED - Tesa adhesive comes fitted round the edge, so there's no cutting and laying adhesive strips.
- SENT FROM NZ STOCK - Shipped from our New Zealand stock, so there's no waiting weeks for a part to arrive from overseas.
Part Includes:
- 11-inch LCD and touch digitiser assembly
- Pre-fitted Tesa adhesive
- 12 Month Warranty
Please Note
Does NOT fit the iPad Air 4 / 5 or iPad Pro 11". Not confirmed to fit the 2026 iPad Air 11" M4. Check the A number on the back of your iPad.
Please Note
Aftermarket screen, not an official Apple part. True Tone and auto-brightness may not work after the swap.
Specifications
- Display Size: 11-inch (diagonal)
- Resolution: 2360 x 1640 pixels (264 ppi)
- Display Type: LCD
- Refresh Rate: 60Hz
- Type: LCD and touch digitiser assembly, glass laminated
- Adhesive: Tesa tape pre-fitted
- Home Button: None. Touch ID is in the top button, so nothing moves across
- Colour: Black
- Condition: Brand new aftermarket
- Pairing: Not needed. This iPad doesn't check its screen, so no Unknown Part message.
- Warranty: 12 Months
Compatible Model Numbers
iPad Air 11" M3 WiFiModel Number (A Number)
- A3266
iPad Air 11" M3 WiFi Model NumbersHow do I find my Model number?
Model Identifier
- iPad15,3
EMC Number
- EMC 8776
Device Number (M Number)
- MC9X4
- MCA34
- MCAJ4
- MCAU4
- MCA44
- MCAA4
- MCA74
- MCA14
iPad Air 11" M3 WiFi + CellularModel Number (A Number)
- A3267
- A3270
iPad Air 11" M3 WiFi + Cellular Model NumbersHow do I find my Model number?
Model Identifier
- iPad15,4
EMC Number
- EMC 8777
Device Number (M Number)
- MCFW4
- MCG14
- MCFX4
- MCG44
- MCG64
- MCFV4
- MCG04
- MCGE4
- MCGJ4
- MCGN4
- MCGL4
- MCGD4
- MCGH4
iPad Air 11" M2 WiFiModel Number (A Number)
- A2902
iPad Air 11" M2 WiFi Model NumbersHow do I find my Model number?
Model Identifier
- iPad14,8
EMC Number
- EMC 8392
Device Number (M Number)
- MUWD3
- MUWH3
- MUWR3
- MUWU3
- MUWJ3
- MUWG3
- MUWL3
- MUWQ3
iPad Air 11" M2 WiFi + CellularModel Number (A Number)
- A2903
- A2904
iPad Air 11" M2 WiFi + Cellular Model NumbersHow do I find my Model number?
Model Identifier
- iPad14,9
EMC Number
- EMC 8393
Device Number (M Number)
- MUXE3
- MUXJ3
- MUXG3
- MUXV3
- MUXM3
- MUXH3
- MUXD3
Installation Help
Check out the video above or the step by step guide below for assistance with this repair
iFixit iPad Air 11" M2 Screen Replacement Guide
iFixit iPad Air 11" M3 Screen Replacement Guide
Here are some tools you may need to help you complete the repair.
Please note: A discounted simple toolset with the tools you need is available in a pop-up when you add this product to cart
- #00 Metal Phillips 2.0mm Screwdriver Tool (PH00)
- uFix iOpener Microwaveable Heated Bag Opening Tool
- CPB 320 Repair Heat Pad for mobile phones and tablets
- Large Blue Suction Cup Opening Tool
- iGadget Plastic Triangle Opening Picks (set of 5)
- Nylon Antistatic Spudger Pry Tool
- Mechanic AK-15 King ESD Anti-Static Stainless Steel Red Curved Tweezers
- iGadget Plastic Alcohol 200mL Bottle with Pump Top
- iGadget Universal Magnetic Work Project Mat with Marker (30cm x 25cm)
Here are some helpful tips to assist you in completing a safe repair on your device. If you are unsure of something or have any questions, please feel free to contact us either by phone (0508 IGADGET) or by email
- The battery stays connected for this repair, so drain it fully before you start.
- Power the iPad off before you start, and tape over cracked glass so it lifts in one piece.
- Keep metal tools away from the battery and board, and never bend, crush or puncture the battery.
- Warm the edges with the iOpener or heat pad in short passes, as too much heat can damage the battery.
- Keep opening picks no deeper than 2mm near the screen cables and the front camera edge, and 6mm elsewhere.
- The screen swings open from the left edge like a book.
- Always track your screws on a magnetic mat, as they are different lengths.
- Refit press connectors by pressing one side then the other until they click, never the middle.
- Test touch, the picture and auto-brightness before you seal it, and leave the protective film on until the new screen works.
- Clean the old adhesive off the frame with isopropyl alcohol before you stick the screen down, and hold it while the adhesive sets.
What’s In The Box
- 1x iPad Air 11" M2 / M3 replacement LCD and digitiser assembly, Tesa adhesive pre-fitted

In Stock